Main > Main Forum
Turbo Twist 2 - what is the 5-pin connector?
welash:
Not sure if this is the right connector or not, but it looks a lot like an AMP mini CT connector. Digikey part number A100195-ND looks like the 5 pin. Here is a link
http://www.digikey.com/product-search/en?pv88=24&FV=fff40018%2Cfff8009a%2C117c0008&mnonly=0&newproducts=0&ColumnSort=0&page=1&quantity=0&ptm=0&fid=0&pageSize=25
It may be some other type of 1.5mm pitch connector though.
RandyT:
--- Quote from: welash on March 20, 2014, 06:04:23 pm ---Not sure if this is the right connector or not, but it looks a lot like an AMP mini CT connector. Digikey part number A100195-ND looks like the 5 pin. Here is a link
http://www.digikey.com/product-search/en?pv88=24&FV=fff40018%2Cfff8009a%2C117c0008&mnonly=0&newproducts=0&ColumnSort=0&page=1&quantity=0&ptm=0&fid=0&pageSize=25
It may be some other type of 1.5mm pitch connector though.
--- End quote ---
Similar, but too large. It's 1.25mm pitch and there are no matching cables on Digikey.
Did some research and this would be my guess. It's just the housing, so you would need the terminals and then either the snazzy $367 Molex crimper, or the cheapie $47 plier type.
welash:
If that is it, this might be compatible http://www.tinyosshop.com/index.php?route=product/product&product_id=643
nevinskima:
I've ordered some to try. I'll let everyone know when they get here.
RandyT:
--- Quote from: welash on March 21, 2014, 11:23:55 am ---If that is it, this might be compatible http://www.tinyosshop.com/index.php?route=product/product&product_id=643
--- End quote ---
That looks like it has a very good shot at plugging right in. A word of caution using a cable like that: Don't assume the Red and Black are power and ground on third party cable assemblies. The signals must be matched properly to the spinner inputs/outputs, or damage to the spinner will result.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version