Main > Main Forum

Ouya MAME Machine?

<< < (4/6) > >>

sharpfork:

--- Quote from: Generic Eric on March 09, 2014, 01:47:42 pm ---I just finished 2 coinops cabs.  Between the x box splash and the unleash splash, there is no hiding the fact there is an X box running.   I think the prime challenge is hiding the fact there is something other than a single pcb.

--- End quote ---

I hide the flubber with a custom bios.  Soft modders can set a pin on the Kade to fire a relay at a time that fires up your display and audio post flubber.  I still think the xBox + coinops or hypervision are the best non PC solution for a configurable multicab.

I have an OUYA and have tested a few HDMI to VGA converters and the OUYA is less forgiving than generic android devices when it comes to video config.  I would love if OUYA unlocked the boot loader so we could have custom firmware.

yotsuya:

--- Quote from: Generic Eric on March 12, 2014, 11:17:57 am ---
--- Quote from: BobA on March 12, 2014, 10:48:23 am ---  Needs some sort of front end thou.

--- End quote ---


I concur

Also, this is what we are dealing with here:

and here without the fan.


I don't have a bananna for scale, but suffice to say it is small.

I've started to work on mine now that I more free time.

--- End quote ---

Damn, that's some tiny ---steaming pile of meadow muffin---, bro!

Boingo:
Obviously you have never played on an Ouya.

It's a great little console.

My brother sent me an XBox 360 for Christmas, but what do I find myself playing on all the time?

Ouya.

I honestly don't get whay there are so many trolls dissing the system.

Generic Eric:

--- Quote from: Boingo on March 13, 2014, 04:31:44 pm ---Obviously you have never played on an Ouya.

It's a great little console.

My brother sent me an XBox 360 for Christmas, but what do I find myself playing on all the time?

Ouya.

I honestly don't get whay there are so many trolls dissing the system.

--- End quote ---
Not sure who this is directed towards?

kiwasabi:
I would recommend this Android box over the Ouya for several reasons. The biggest one being that the OS and firmware isn't locked down the same way Ouya is. Also it has separate audio output via 3.5mm audio jack. It's also slightly cheaper and has better specs (it's a quadcore 1.6GHZ processor with 2GB of RAM). Just my two cents. By the way, I've definitely had issues getting spinners working on Android. Luckily the KADE device guys are helping on a solution to this issue which they will incorporate into their software moving forward.

http://www.amazon.com/K-R42-Cortex-A9-External-Ethernet-Controller/dp/B00EAGUXA2/ref=sr_1_1?ie=UTF8&qid=1394792818&sr=8-1&keywords=k-r42

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version