Main > Main Forum

Minipac Issue

(1/2) > >>

hypersurfer:
Got everything wired up for my first cabinet build.  LED on minipac indicates everything is working (2 blinks then solid light).  But PC isn't recognizing it.  Looked in Device Manager and nothing is showing up. Tried a different usb cable, same results.

Anything else I should be trying? Do I need to enable anything within MAME for it be recognized?

Shot out a message to Andy @ Ultimarc as well.

Minipac USB
Sansa joysticks - 8 buttons  - two player setup
Windows 7 64 bit

 ??? ??? ??? ???

BobA:
Did you move the jumper on the minipac to the USB setting?

USB~PS/2 Jumper Block
—keep this jumper in the default pos
ition when connecting the Mini-PAC to
the PC’s PS/2 keyboard port. Move the jumper to
the USB position when connecting using a PS/2-to-
USB cable for plugging into one of the PC’s USB port

hypersurfer:
I don't think there is a jumper block on the new ones? This is what I received:



They don't appear to be moveable anyway. . .

BobA:
Sorry must be the previous version. 

juggle50:
Do you see any small yellow exclamation marks next to HID devices in your device manager?  I had to update the driver.

Navigation

[0] Message Index

[#] Next page

Go to full version