Main > Main Forum
iL Translucent Pushbuttons
Brutick:
Thanks for your input PL1!
I read through a portion of Nephasth's build thread, and he mentioned a really good point of the light bleeding from button to button. I will need to consider possibly painting the outside portion of the button black to avoid this. I will probably go with Option 2 as I mentioned earlier, but currently they are out of stock :(. I need to have a hard think about whether I really need RGB or if I could just settle for a solid colour scheme for my project (which I will post about eventually ;)).
I guess I will send armi0024 a PM to see if these LEDs are coming in any time soon.
Thanks,
Brutick
PL1:
Glad to assist.
On the light bleed problem, IIRC someone ordered an extra nut for each button to block the light. (shown with 3/4" MDF)
A little paint on the parts that are still showing should block the rest and keep you from clogging the threads with paint or chipping the paint while tightening/losening the nut.
Scott
jmandmc:
Hey @PL1, @Brutick:
I hope it's not a problem to step in. I'm kinda new to BYOAC and just recently got enough posts to comment on vendor topics.
On the topic of translucent IL buttons, I'm able to get those in stock soon on my website, focusattack.com. We're moving towards supporting home coin-op enthustasts in addition to fighting games, as we became a Happ reseller recently (ordering initial stock now), and and bringing IL products in some time later. That said, we can get IL translucent buttons pretty quickly. From that point, we'll work to keep them in stock to avoid the gaps in supply.
If there are other IL products that players need, let me know and I'll look into bringing those in.
I'll have a vendor sticky here in a few days, but in the meantime, I hope you'll check out the site sometime.
Jaleel Beck
Final Boss
www.focusattack.com
Toll Free: 855-95-FOCUS (855-953-6287)(M-F 10a.m.-5p.m. EST)
Fx: 610-978-3009
PO Box 284 Macungie PA 18062
service@focusattack.com
armi0024:
Just to clarify, there are a few different things that people are talking about.
There are the original Translucents,
As well as the Hoku Style
Also based on BYOAC projects we are the first and only company to bring out the combination black plunger write rimmed buttons (thank you for the inspiration Nep)
We asked IL to make a new button for the Howler Project, and they delivered! (they actually delivered them to us today)
Introducing the Convex Hoku button.
These competition (convex) style IL buttons will be a great addition to your arcade cabinet or fight stick! Combine these with the Howler or Kaimana and the IL-lumination LED boards for an amazing effect!
Howler Preorders are available through the website!
IL products aren't something that we are adding on, we have been dedicated to IL since we started. These are a stock items in the store, and available to ship today.
IL-Lumination LEDs work great with any of these buttons!
ChanceKJ:
Here Brutick, this might help...
http://forum.arcadecontrols.com/index.php/topic,135459
I'm using them in this...
http://forum.arcadecontrols.com/index.php/topic,135116.0/all.html
I bought all my buttons/RGB LEDs from Paradise. It was the way to go after seeing what Neph built with The Beast. I'm not a fan of the white solid colored buttons and much prefer the clear IL with the black plunger look. I decided to pick up a few extra LED modules just in case, (which was worth it because I had a couple fail, but Susan at Paradise replaced them for me).
Also, as for light bleed I feel that an extra button nut is the way to go. Price wise there are pennies difference between them and heat shrink. Not as messy or troublesome as paint, and if for whatever reason you need to pull a button it's a reusable solution that is better then heat shrink. I even messed with Velcro tape. Spend a couple extra bucks and get extra ring nuts from Paradise.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version