Main > Main Forum
Ledwiz Wiring
SgtSlaughter:
Option 1 is fine for your case. Just make sure your using a powered USB source (don't use a non-powered USB hub - directly to the PC should be fine, unless it is a laptop as some ports aren't always powered). You can definetly use all 32 outputs, although not if your using option 1, as you'd be using too much power for the USB. You can also hook up multiple leds to each output (although someone would have to verify what the maximum is) - which in your case is not needed.
Bambam1963:
Thanks Sgt Slaughter. That was the kind of answer I was seeking. I will daisy chain the 5vdc directly to the power supply. I figured a 500 ma fuse should be okay for 22 standard LED's. I found 500 ma fuses today, but could not find a fuse holder that could accommodate them. I read else where that a 1 amp fuse would suffice?? Thanks again for everyone's input. I am finishing up the wiring and then will be taking it on it's maiden voyage. :-)
Navigation
[0] Message Index
[*] Previous page
Go to full version