Main > Main Forum
Mounting LCD/Screen
sleong:
--- Quote from: BobA on October 22, 2013, 02:32:36 am ---Can you provide a picture of the back of the LCD? I have never known one not to come without the screw holes for a VESA mount.
--- End quote ---
Not sure how well you can see but those 4 screws is holding the back panel to the LCD. I removed all screws before and looking for longer screws but none yet (I'm not looking very hard at the moment)
The bottom 4 holes if you can see them is for the stand.
eds1275:
Measure them. I bet they are 100mm apart. I believe you are looking for M4 screws, the length of your mounting board plus the length of the current ones in there.
BobA:
Those 4 screws on the back of the main monitor look like vesa spaced screws. They should be removed and as eds1275 said they should be 100 mm apart. You will not find longer screws the short screws removed from the back of the monitor allow longer screws that come with the mount to go into these holes. There are no screws provided with the vesa mount on the monitor just appropriately spaced screw holes.
edit: Clarification
sleong:
So should I get a wall mount to use inside the cabinet or should I just get longer screws?
eds1275:
I just used a board on mine. It's hidden, no need for it to look good.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version