Main > Main Forum

How is this parts list?

<< < (2/4) > >>

rCadeGaming:
I was just wondering.  Idk, I've tried both and the Seimitsu's didn't impress me that much, so I stuck with Sanwa.  Their microswitches seemed to actuate more smoothly.  TBH, I put a lot more thought into selecting joysticks than buttons though.

BobA:
The LED lights for the marquee are fine for a bartop as the marquee area is fairly large on most of them.  If you find you have too much light you can always cut back but it depends on the placement to get rid of shadows from speakers etc.

fantoboy:

--- Quote from: rCadeGaming on October 06, 2013, 10:04:03 pm ---I was just wondering.  Idk, I've tried both and the Seimitsu's didn't impress me that much, so I stuck with Sanwa.  Their microswitches seemed to actuate more smoothly.  TBH, I put a lot more thought into selecting joysticks than buttons though.

--- End quote ---

I haven't put much thought into it either, I was just trusting the SRK users.  I do have a TE stick with Sanwa parts, and I can't complain

 
--- Quote from: BobA on October 06, 2013, 10:21:23 pm ---The LED lights for the marquee are fine for a bartop as the marquee area is fairly large on most of them.  If you find you have too much light you can always cut back but it depends on the placement to get rid of shadows from speakers etc.

--- End quote ---

Yeah, I'll probably get it and see if only half the lights are sufficient.  I plan on building another bartop so maybe I can spread the light into both since it comes in pieces

rCadeGaming:
I think the measurements between the two monitors differ because:

1.  The measurements here make no sense:

http://www.amazon.com/Asus-VS238H-P-23-Inch-Full-HD-LED-Lit/dp/B005BZNEVQ/ref=sr_1_1?ie=UTF8&qid=1381036749&sr=8-1&keywords=ASUS+VH236H+Black+23%22

2.  The measurements here look like they include the stand:

http://www.amazon.com/dp/B008DWITHI/?tag=dislag-20

Taking a measuring tape to mine (VS239H-P), the measurements without the stand are 21.7" wide x 14.1" tall x 1.5" thick.

I doubt the 238 is actually much different, if at all, just judging by the pictures.  You could probably get accurate measurements from the manuals to confirm.

fantoboy:
Thanks for the measurements.  Looks like it is exactly the same according to this post:
http://forum.arcadecontrols.com/index.php/topic,130522.msg1342278.html#msg1342278


Does anyone have experience using this kind of socket:
http://www.amazon.com/dp/B00511QVVK/ref=pe_175190_21431760_M2T1_SC_dp_1

Is it self defeating to have a power switch and a smart strip?  Or can I wire the PC to be controlled by the switch?  Or maybe I'm better off having a seperate external button for the PC's power, and get something like this without the power switch:
http://www.amazon.com/Interpower-8301213-Disconnects-Socket-Rating/dp/B00917Z96S/ref=sr_1_2?s=electronics&ie=UTF8&qid=1381118280&sr=1-2&keywords=Inlet+Male+Power+Socket

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version