Main > Main Forum
OMNI-Stik PRODIGY (TM) - New Product Announcement
crsdawg:
you could chalk me up for one of these as well if you offered it with a standard ball top handle.
in my mind the non-standard handle is the only weak point of, what looks to be, a very nice product.
PacManess:
I would gladly pay an extra 10 dollars to get that authentic "Pac" look...however it isn't a "deal-breaker" for me, as I am probably going to order 2 of these sticks anyway once I'm ready to get to building.
My only concern is how it handles during Pac-Man. The look I can deal with, the color isn't THAT important...but man oh man, I better not get stuck in any corners.
nsb
RandyT:
--- Quote from: nosleepboy on December 02, 2003, 12:42:38 am ---I would gladly pay an extra 10 dollars to get that authentic "Pac" look...
--- End quote ---
Ok, no promises, but I AM on the the job. Waiting for some quotes to see if I can make this happen. I might as well mention that if I can pull this off, the new stick will be made available for sale separately to those who have already ordered an OMNI-Stik from GGG in the past. But like I say, nothing is certain until I see some numbers.
--- Quote ---however it isn't a "deal-breaker" for me, as I am probably going to order 2 of these sticks anyway once I'm ready to get to building.
My only concern is how it handles during Pac-Man. The look I can deal with, the color isn't THAT important...but man oh man, I better not get stuck in any corners.
--- End quote ---
Good to hear. And you have absolutely nothing to fear in that respect. ;)
RandyT
Grasshopper:
--- Quote from: RandyT on December 02, 2003, 01:20:08 am ---
--- Quote from: nosleepboy on December 02, 2003, 12:42:38 am ---I would gladly pay an extra 10 dollars to get that authentic "Pac" look...
--- End quote ---
Ok, no promises, but I AM on the the job. Waiting for some quotes to see if I can make this happen. I might as well mention that if I can pull this off, the new stick will be made available for sale separately to those who have already ordered an OMNI-Stik from GGG in the past. But like I say, nothing is certain until I see some numbers.
RandyT
--- End quote ---
Randy, if you do decide to run with this idea (and I sincerely hope that you do!) then may I make a few suggestions:
* Sell the handles separately. $45 for just one joystick (Omni-Stik + ball top handle) might be outside many people's financial comfort zone. However, I'm sure that many people would be prepared to buy the handles separately if they only cost $10 or so.
* Team up with the guy who until recently sold replica ball top handles on Ebay for about $10 each. His email address is n2new@aol.com.
* You will have a much bigger market if you sell generic handles that can be fitted to a wide variety of joysticks. The Suzo 500 and (as far as I am aware) all of the Industrias Lorenzo joysticks have handles with a 10mm shaft. It should be therefore possible to design a generic ball top handle with a 10mm (stainless?) steel shaft that can be fitted to all of the aforementioned joysticks. You simply have to cut a number of different grooves into the shaft so that the c-clip can be fitted at different positions depending upon which type of joystick the shaft is being fitted to.
* Make sure the shaft is height adjustable by cutting extra grooves and supplying a spacer, as Happ do with their joysticks.
* Supply the handles in at least the following colours: red, black, and blue (preferably the dark Wico blue).
If you do all of the above, then I believe you'll be on to a winner!
shmokes:
This may be useful info even though I will likely not be a customer.
Had you had this product out a few months ago when I bought most my parts I would have bought a true ball-top in a second. As it is I bought two perfect 360's and I still have to get a dedicated 4-way. I would love to have eliminated the need for the dedicated, but I already have my perfect 360's so that's what I'll use. It's no use to me, at this point, to get your product over, say, a galaga/ms pacman stick because I don't need the 8-way functionality on that stick.
However, even when I was in the market, I don't think I would have bought your product with the half-n-half style grip just because I think it's ugly. That may seem like a strange, nit-picky thing to worry about with all the functionality it brings to the table, but the mere fact that we are a bunch of geeks that want to build full-size arcade cabinets is evidence enough that we are fanatics. I guess I'm just particular.
In short, yes, I think you should produce ball-top style handles. Most of us are American and that stick just doesn't have the nostalgic punch of a ball-top or the familiarity of a full-on bat-handle.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version