Main > Main Forum
Finally going to build my first cabinet - Some questions I have about buttons
sleong:
--- Quote from: PL1 on August 25, 2013, 07:26:03 pm ---If you just want buttons and digital (microswitch) joysticks, either one will work.
If you also want analog (potentiometer) joysticks, a Star Wars Yoke, analog gas/brake pedals, or a 270 degree steering wheel, a UHID/A-Pac/other analog encoder can do the needed analog to digital conversion.
Spinners and trackballs require optical encoders.
--- End quote ---
It will just be buttons and joysticks that's all!!
sleong:
--- Quote ---
Slagcoin layouts + test panel on a cardboard box + test playing will tell you which layout you like better before you go to the trouble of making two panels. :cheers:
Scott
--- End quote ---
When printing out the control panel layouts from slagcoin.com sight what DPI should I be printing them in to get the actual/correct size? I tried two printouts than it was either way too big or way too small.
I'm pretty close to the control panel part of the project and would like to test cut/drill before drilling the actual control panel.
Steve
PL1:
Not sure if you can print the image from your browser -- Firefox appears to be distorting them like you described.
Not sure if Windows photo printing wizard will resize and distort the image. :dunno
I saved the images and embedded them into a PowerPoint document so I could print the different layouts that I was considering.
Scott
Navigation
[0] Message Index
[*] Previous page
Go to full version