Main > Main Forum

LED BUTTONS

<< < (7/11) > >>

Malenko:

--- Quote from: yotsuya on August 15, 2013, 03:46:59 pm ---
--- Quote from: Caparo8bit on August 15, 2013, 03:39:51 pm ---how many buttons can j-pac control ( right now im using 10 (not using xtra ports in j-pac jet)???

--- End quote ---

4 per player, plus coin and start, right?

--- End quote ---


nuuuuu it does the standard jamma and has 3 or 4 extra per player on the top. so at least 6 or 7 per

yotsuya:
You're right, it had the extra terminals. I was just thinking JAMMA

Caparo8bit:
ok so im planning to install  19 led buttons ( 2 players)   (12)6 for each player  2 for coins 2 for start  and three for Maximus Arcade (1)esc.(1)home.(1)enter my show case 33" is for 4 players but i only see player 3 and 4 harness hanging ( not connected to jamma h.) how do i connect this so i can use more buttons??  :dunno  oooh also what type of quick disconnect harnes r good for speakers and power my arcade comes in two pieces so when i moved will b nice to just disconnect and connect ( not cuting cable everytime)

BobA:
Since you only have a 2 player control panel you would need to build a 4 player control panel to connect the hanging wires for player 3 and 4.

Caparo8bit:

--- Quote from: BobA on August 16, 2013, 12:33:26 am ---Since you only have a 2 player control panel you would need to build a 4 player control panel to connect the hanging wires for player 3 and 4.

--- End quote ---
what im trying to do is connect player 3 or 4 to jamma harness and use those buttons for   maximus arcade options like esc. home. enter ....

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version