Arcade Collecting > Merit/JVL Touchscreen
Megatouch Auto Test
lilshawn:
sometimes if the board overheats and crashes it can cause this too. I'd pull the CPU heatsink and clean off the goop (if any) and put some new stuff on there.
didgey101:
I dont have any heat sink compound and its 10pm here so will have to wait til tomorrow. Will try that first and let you guys know. Thanks again. ..
lilshawn:
--- Quote from: didgey101 on August 12, 2013, 04:56:08 pm ---I dont have any heat sink compound and its 10pm here so will have to wait til tomorrow. Will try that first and let you guys know. Thanks again. ..
--- End quote ---
If that cooler is still stock, likely it will have this weird graphite/aluminum foil jobby on there. peel that crud off and clean everything up and put some nice grease on there. that'll bring down your temps 10 degrees right there. I don't know what the heck they were thinking when they put that together.
smartbomb2084:
Download this PDF and go to the CMOS CONFIGURATION page and follow the instructions for ECS (FORCE) at the bottom of the page.
Make sure your battery is good. This should help you out too.
didgey101:
I now have a brand new cmos battery from Maplin electronics as well as some proper high quality heat sink compound and I have a print out of the cmos setup that was posted on here so I will be home from work in an hour or so and I will get stuck in and Im hoping I may be able to post back here a bit later with either some good news or crying for more help...
Thanks...Tim
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version