Main > Main Forum

Trouble Understanding the I-PAC 2

(1/1)

VRKnight:
Hello All

Noob here, wiring up an I-PAC 2 to do some testing. I am having some issues understanding how it functions...I see that all of the buttons are wired to ground, without any voltage source being applied. How does the I-PAC know when a button is pressed? I understand that we are closing the circuit, but I am not understanding where the external voltage source is located to create a voltage drop. Are the inputs active low? Or am I just being a serious fool and missing something obvous?

Monkeyvoodoo:
Voltage source is supplied through the interface connection (usb/ps2).

Remember, there are no stupid questions  :)

VRKnight:
Ah OK, so the input pins on the I-PAC are constantly supplied voltage from the USB bus and pressing the button closes the circuit activating the pin? I think I'm getting it, Thank you!

Monkeyvoodoo:
No problem.

And just to clarify(and I may have just read the original post wrong) but make sure you just put the grounds, player 1 and player 2 respectively, on the ground pins. You want the "hot" connections going to the labelled pins.


Sent from where ever I happen to be.

Navigation

[0] Message Index

Go to full version