Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

« previous next »
Pages: [1]
  
Go Down

Author Topic: Sharp 19" with arcadeVGA and amp cable - Top portion of the screen is skewed  (Read 884 times)

0 Members and 1 Guest are viewing this topic.

joenet

  • Trade Count: (0)
  • Newbie
  • *
  • Offline Offline
  • Posts: 1
  • Last login:May 13, 2013, 12:56:02 pm
  • I want to build my own arcade controls!
Sharp 19" with arcadeVGA and amp cable - Top portion of the screen is skewed
« on: May 10, 2013, 03:59:42 pm »
Setup is
Atari Vindicators with Sharp 19" display. Manual says pin 6 is "Negative Composite Sync"
http://www.arcade-museum.com/manuals-monitors/Atari%20Monitor%20TM-304%201st%20Printing%20Sharp%2019in%20Color%20Raster.pdf

I have tried to connect an ArcadeVGA (2nd gen) to the arcade using the breakout cable / amp from Ultramarc.  The video looks perfect from the botton to about the last 10% of the top. The top 10% of the screen is skewed to the right or sortof looks rolled over.  I have tried all sorts of adjustments on the monitor with no luck.  Am I connecting the syn wire correct to the vga amp? I connected the pin 6 wire from the monitor to the syn connection on the amp.
« Last Edit: May 10, 2013, 07:15:58 pm by joenet »
Logged
Pages: [1]
  
Go Up
« previous next »