Main > Main Forum

Ipac4 issues

<< < (2/2)

Dekieon:
I am assumeing that you have tried it with notepad, and that is where you are seeing the 5's and 1's?

Try a different USB port.
Disconnect the keyboard if there is one attached.
Is the ipac connected to the pc directly or to a hub? If it is connected to a hub, try connecting to the pc directly.

negsense:
Connected straight to the USB port, tried it on two different PCs. Yeah, the output is from Notepad. Is there any way to flash the firmware?

Dekieon:
Possibly, I am not sure though. I would contact Andy and see what he says about it.

kahlid74:
When you tried to reset it did you note which port it was set to in the menu?  If you set it to PS2 and the IPac is plugged into USB it will error.  I had a problem similar to this until I changed it to the correct port, reset and then it was all gravy.

negsense:
Checked to make sure it was USB and not PS2. Andy answered my email really quickly and he's helping me with it.

Navigation

[0] Message Index

[*] Previous page

Go to full version