Main > Main Forum

Insert Coin/Coin Reject

<< < (3/7) > >>

mgb:

--- Quote from: lilshawn on March 19, 2013, 10:06:29 am ---Don't set your sights on new stuff, you'll get tunnel vision. you can grab something beat up for next to nothing, hit it with a hammer and some fresh paint and have yourself a cherry looking door.

don't forget there is also a virtual treasure trove over in the buy/sell/trade area.

--- End quote ---

+1000

It's makes so much sense to go used.
And try not to make the mistake that others have made, don't think you have to order from Happ.

 Your question wasn't silly though. Your just getting into this. Like anything, you live and learn and it gets easier

keilmillerjr:
I got a happ over under unit off eBay in like new condition. I made an offer and took it for 75$ shipped.

PL1:

--- Quote from: mgb on March 19, 2013, 12:11:20 am ---Man, you guys are harsh.

--- End quote ---

My intent was to be just a _little_ harsh toward Unstupid for toying with PixelObsession while providing a friendly nudge in the right direction for PixelObsession.   :cheers:


Scott

Seith:

--- Quote from: mgb on March 19, 2013, 12:11:20 am ---If you have coin mechs in place in the coin door, you may have to make it so the reject button doesn't actually engage with the arm on the coin mech to make the action smoother.

--- End quote ---

I am currently trying to figure out how I could mount a microswitch to be engaged by the coin mech swinging out when the arm is engaged by the coin return button.  That way I can have the mech work as it is intended to work as well as the ability to press the coin return button to coinup.

Le Chuck:
I'd just run two micro switches  in parallel on the same circuit

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version