Main > Main Forum
Silver Strike Bowling shows NO SIGNAL on monitor
ed12:
hi
ya na na the na na :cheers:
u can by-pass the crt by just hooking a lcd to the vga out of the video card
if u are not getting video there ? any ati video card will work
they are not like our other problem childern :)
ed
stpcore:
I tried another monitor and still received NO SIGNAL. It's funny because if I remove the battery from the motherboard for 20 minutes or so and put it back in it will occasionally boot to the IT screen. But if I turn it off for a few minutes and turn it back on...NO SIGNAL. I replaced that battery with a new one but it was sitting in cold weather so I'm wondering if it drained it somehow. So you say ANY video card will work? I thought the Nighthawks were picky on hardware, no?
ed12:
hi
not really
there perty robust
it's gaming loaded them with just about every ati file there was
less a few newer 1's
ed
Vigo:
Sorry to necro this thread. I just picked up a SSB 09 and am having a similar issue. Stpcore, were you able to resolve this? did it need a new video card?
stpcore:
--- Quote from: Vigo on October 13, 2014, 03:54:25 pm ---Sorry to necro this thread. I just picked up a SSB 09 and am having a similar issue. Stpcore, were you able to resolve this? did it need a new video card?
--- End quote ---
Man, I don't remember what I did to get that one going. I've owned 9 or 10 Silver Strikes over the past few years and about half of them had little issues. I do have spare video cards for the Silver Strikes. If you want I can ship one to you and you can see if that clears up your issue. Is your only problem the "NO SIGNAL"? Did you try to connect it to a VGA input on a monitor to see if you get a pic (not sure if you are using the JAMMA for video or not)?
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version