Main > Main Forum
How many buttons do I need?
lilshawn:
--- Quote from: Mruvek on January 31, 2013, 01:19:51 pm ---
--- Quote from: jammin0 on January 31, 2013, 12:52:17 pm ---If you want to play most of the games then I would recommend:
6 player buttons
1 coin button
1 start button
1 exit button
--- End quote ---
Start and exit to start and exit game, or whole cabinet :P?
And my PC have Duron 900mhz, Radeon 9200 and 256mb ram. Is it enough to play simple games (I mean i don't want to emulate PS1 or N64)?
--- End quote ---
if you go with an older version of mame, you won't need a huge system to play most of the games. the later releases need more horsepower.
Mruvek:
I downloaded newest Hyperspin, but it don't works well... so what should i choose to play classic arcade games on this old machine?
jammin0:
--- Quote from: Mruvek on January 31, 2013, 01:19:51 pm ---
--- Quote from: jammin0 on January 31, 2013, 12:52:17 pm ---If you want to play most of the games then I would recommend:
6 player buttons
1 coin button
1 start button
1 exit button
--- End quote ---
Start and exit to start and exit game, or whole cabinet :P?
And my PC have Duron 900mhz, Radeon 9200 and 256mb ram. Is it enough to play simple games (I mean i don't want to emulate PS1 or N64)?
--- End quote ---
You'll also need a power button to turn on and off the machine. Most people use a momentary push button (like an arcade button). From XP and on I believe, one push of the power button will shutdown Windows. In addition you need a P1 Start button and an Exit button that is like the escape key and gets you out of Mame and back to your frontend.
Hyperspin has a lot going on with it. You should check out the MaLa Frontend forum at the top of the page. It might be a little bit harder to setup then hyperspin but they are all sort of equally hard in my opinion.
Javy3:
--- Quote from: Mruvek on January 31, 2013, 01:41:15 pm ---I downloaded newest Hyperspin, but it don't works well... so what should i choose to play classic arcade games on this old machine?
--- End quote ---
No, I have a crappy old computer and it plays plenty of arcade games for MAME new and old, NES-Genesis and even a PSX emulator just fine. The problem is that Hyperspin actually is pretty taxing on the computer as a front end. My PC was slow with Hyperspin so I chose Mala as the frontend and am quite content.
Hyperspin running slow does not represent how fast your emulators and games will run.
PL1:
--- Quote from: Mruvek on January 31, 2013, 01:19:51 pm ---Start and exit to start and exit game, or whole cabinet :P?
--- End quote ---
Start/exit for game -- Default keystrokes "1" and "Esc" in MAME.
You may also want a power button for booting up/shutting down.
What type of build do you have in mind?
A standalone portable control panel/fightstick, a full-size cab build, a bartop?
The best choice for buttons can change depending on the nature of the project.
Scott
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version