Arcade Collecting > Miscellaneous Arcade Talk

PGA Tour Golf by Global VR & EA Sports Owners Thread

<< < (12/556) > >>

stpcore:
Make sure your bios match this...

You can do this by repeatedly hitting the DEL key while the computer is attempting to boot. Once in the bios screen make sure that these values are matching your machine. Make sure your settings match the ones below.

....main screen...
on power boot >>delete key<<
this will take u to the bios screen

std setting's as follow's
current date must be current
current time must be current

ide primary >> wdc wd200bb >20meg< this is the hard drive def for your unit..could veri
ide slave >> none
ide secondary >> master >cdrom<
ide secondary >> slave none

drive a 3.5"
drive b none

video >> ega/vga
halt on >> no error's
base mem >>640k
extened mem >> 52364
total >> 524288

....advanced....
bios flash protect >> disabled
virus warring >> disabled
cpu l1 & l2 cache >> enabled
quick power on self test >> fast
first boot device >> cdrom
second boot device >> hdd-0
third boot device >> floppy :we can turn this off:
boot other device >> disabled
swap floppy drive >> disabled
boot up floppy seek >> enabled :we can turn this off:
boot up numblock status >> on

that is the first 2 settings page
we skip the third and go to the 4th

......integerated peripherals......
on-chip primary pci ide >> enabled
ide primary master pio >> auto
ide primary slave pio >> auto
ide primary master udma >> auto
ide primary slave udma >> auto
on-chip secondary pci ide >> enabled
ide secondary master pio >> auto
ide secondary slave pio >> auto
ide secondary master udma >> auto
ide secondary slave udma >> auto
usb controller >> enabled <<< important >> USB will not work if disabled
usb keyboard support >> disabled
ac97 audio >> auto
ac97 modem >> auto
init display first >> agp : this is 1 of the setting's we change when using a dif video card
onboard ac97 codec >> enabled
onboard lan control >> enabled :we need this for turenne
onboard lan boot rom >> disabled :we enable it to use the lan
ide hdd block mode >> enabled : this is beacuase u may have a cable select mode,and or master/slave setting on your hd setup

that is part 4 of the bios setup

Once your values are complete try restarting the computer and see if it gets you anywhere. At that point even if it's not booting at least you are starting your diagnosis with the correct settings.

Slimonce:
Made Ur changes  still get the CDROM issue. Hit cancel and boot exe get this. Odd thing is this is a champ III yet screen looks like regular champ.

lilshawn:
you may need to re-install. looks like your usb drivers went kaput, or the board did.

reloading software is free, i'd try that first.

Slimonce:
Will do. Waiting for discs to show up in mail. Pray that's the ticket!  Thanks to you and stp for all the help today.

stpcore:
My Championship III screens look like it is a regular Championship version as well. It's normal.

Navigation

[0] Message Index

[#] Next page

[*] Previous page