Main > Main Forum

Shortest Barrel Pushbuttons

(1/3) > >>

rsigamer:
Hello,

I'm looking for some arcade pushbuttons that will take a standard Cherry/whatever microswitch with the shortest possible barrel.

Paradisearcade have some that are 52.5mm, measured from the bottom of the bezel to the bottom of the leg.
I really could use some that are shorter still.

Any suggestions?

Thanks.

BadMouth:
If you don't find what you're looking for and don't need many, I once chopped a section out of the center and glued it back together.
Just cut the housing toward the top so you still have the threads where you need them and cut the same amount from the plunger in the middle.
If they feel too stiff, cut the spring.  :P

PL1:
Is there a reason you don't want to consider using Ultimarc's Goldleaf buttons?



They are only 1.312" from the bottom of the bezel to the bottom of the button.


Scott

DrChek:

--- Quote from: PL1 on November 28, 2012, 02:11:16 pm ---Is there a reason you don't want to consider using Ultimarc's Goldleaf buttons?

They are only 1.312" from the bottom of the bezel to the bottom of the button.

--- End quote ---

These are great. Highly recommend.

jpS14:
there's always sanwa pushbuttons

Navigation

[0] Message Index

[#] Next page

Go to full version