Main > Main Forum

megatouch xl upright touch screen panel

<< < (4/5) > >>

M.Lanza:
There is a video on youtube showing someone using
a similar elo monitor with the megatouch xl hardware.

If it doesn't work, you could disconnect the touchscreen
from the elo's built in touchscreen controller and wire it
up to the 3m controller.

mahkeymike:

--- Quote from: cannell123 on November 27, 2012, 02:55:08 pm ---Would I be able to tell on start up which drivers I have as when I start it I noticed elo came up

--- End quote ---

They used both microtouch and elo touchscreens in the earlier versions so what your most likely seeing is a script running. From what ive heard is that in newer models they removed support for elo touchscreens so the elo script was probably commented out.

I dont have much experience with elo touchscreens. Ive only ever had one elo touchscreen that was resistive  touch and i can verify it didnt work with force or ion but i never tried it with a xl titanium so i dont know. The microtouch they use are capacitive.

cannell123:
Thanks for all your help , in the end I got a 17 inch crt elo touchscreen cost me £15 with delivery and it works a treat just got to fit it in , again thanks for your help

shumard76:
Hi, I have a megatouch gold XL upright cabinet, bought it 2 weeks ago for next to nothing. The crt monitor was gutted, and I have an 18 inch Elo LCD touchscreen I was hoping to hook up. With the vga and serial cables hooked up, I start the machine and I get the opening "megatouch gold" screen, and then the game options, but the touchscreen portion is not working.  has anyone else done this? I am not sure if my elo touchscreen truly doesn't work or what the hold up is. Any advice would be greatly appreciated.   -Steve

yotsuya:
Try a new serial cable. The same thing happened to me recently. A new cable solved everything.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version