Main > Main Forum

Will I ever find a coin door to fit this hole?

<< < (2/5) > >>

Well Fed Games:
I would just mount another piece of wood behind the hole and mount a normal over/under door in that... the cutout would be a cool depth accent to the coin door, which is really the design highlight on the front of most machines.

pinballjim:
I'd just cut out a panel that will fit in that hole and make it removable.  There's no need for a coin door on a MAME machine.

ChadTower:

--- Quote from: Well Fed Games on October 10, 2012, 10:02:29 am ---I would just mount another piece of wood behind the hole and mount a normal over/under door in that...

--- End quote ---


Yep.  Change the opening to fit whatever door you want. 

Vigo:

--- Quote from: TalentedM on October 10, 2012, 02:25:27 am ---http://www.quarterarcade.com/Game.aspx/10147



I found something so close. It says it is measured "20 1/2" tall by 10" wide". I haven't been able to find something exactly that measurements.

I hope you can find something and I will try to keep this in mind while searching around.

--- End quote ---

I'd personally test my luck with this. If there is a slight gap, just narrow the hold a tad with some wood or metal stripping. Might make it a little more flashy too.

yaksplat:

--- Quote from: pinballjim on October 10, 2012, 10:44:07 am ---There's no need for a coin door on a MAME machine.

--- End quote ---

There is when you want to control your kids and how much they use the machine.  I can give my boys $5 in quarters and when they run out, they're done.

I have a feeling it'll become a college fund as well.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version