Software Support > GroovyMAME

Radeon 4890, able to use only one display, help.

<< < (2/2)

Calamity:
Hi Hammerfist,

I'm afraid that's the only method that I know of. Make sure you placed the key in the right place, just in case. When it works (it did for me), what happens is that - if I remind right- both outputs are enabled by default on start, so if you go to display/properties you can see both screen icons turn on.

Hammerfist:
Ok, well, if I read the instruction correctly, Catalyst CC should show the correct registry path in the 2D driver file path, yes? For example

/REGISTRY/MACHINE/SYSTEM/ControlSet001/Control/CLASS/{4D36E968-E325-11CE-BFC1-08002BE10318}/0000 and I created it exactly there, setting the value to 1. Also tried creating it to folder 0001, which was there as well and then to both, but no luck.

Calamity:
That's not the right path. Create a log with GroovyMAME and get it from there. It will look like this:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Video\{4D36E968-E325-11CE-BFC1-08002BE10318}\0000

Hammerfist:
Hi Calamity. Yeah, I was writing this last night and didn't pay attention to the path. I took it quickly from my desktop, which has a different 2d path, it seems. That path you mentioned is the same my cabs PC has and where I created the dword. Sorry for that :).

Navigation

[0] Message Index

[*] Previous page