Main > Main Forum
Ipac 4 - USB Cable Option $4,, Is this a standard USB Cable?
iserian:
The DIY encoders look ingenious.
From a patience standpoint I have several email's into Paradise over the past several weeks with ZERO responses. If I had confidence the Lono was going to be in stock in the near future it looks like a nice/simple solution. I have Ipac2's in my other cocktail's and are doing the trick.
--- Quote from: MTPPC on September 06, 2012, 10:16:57 am ---
--- Quote from: Nephasth on September 05, 2012, 10:19:09 pm ---Patience... It's not gone forever. You've only been logged on to BYOAC for 7 1/2 hours, go cruise the Project Announcements.
--- End quote ---
So are you suggesting iserian wait until Pardise Arcade gets an unknown product shipped in from China to progress on his or her project? I don't know the answer to the OP's question. I suspect that it's not a standard USB cable because there seems to be no USB jack on any of the I-Pac4 pictures I have seen.
And if were pitching alternatives, I think a pair degenetron's diy encoders can satisfy iserian's needs. http://forum.arcadecontrols.com/index.php/topic,120362.0.html
--- End quote ---
MTPPC:
--- Quote from: iserian on September 06, 2012, 11:01:56 am ---The DIY encoders look ingenious.
From a patience standpoint I have several email's into Paradise over the past several weeks with ZERO responses. If I had confidence the Lono was going to be in stock in the near future it looks like a nice/simple solution. I have Ipac2's in my other cocktail's and are doing the trick.
--- Quote from: MTPPC on September 06, 2012, 10:16:57 am ---
--- Quote from: Nephasth on September 05, 2012, 10:19:09 pm ---Patience... It's not gone forever. You've only been logged on to BYOAC for 7 1/2 hours, go cruise the Project Announcements.
--- End quote ---
So are you suggesting iserian wait until Pardise Arcade gets an unknown product shipped in from China to progress on his or her project? I don't know the answer to the OP's question. I suspect that it's not a standard USB cable because there seems to be no USB jack on any of the I-Pac4 pictures I have seen.
And if were pitching alternatives, I think a pair degenetron's diy encoders can satisfy iserian's needs. http://forum.arcadecontrols.com/index.php/topic,120362.0.html
--- End quote ---
--- End quote ---
I, too, had a bad experience with Paradise where they let me hang for a week and then lied to me about a shipment to buy time. The Lono looks great, but I think I'll pass. It's also a little expensive considering you still have to remap your emulators and front-end.
PL1:
--- Quote from: iserian on September 06, 2012, 11:01:56 am ---From a patience standpoint I have several email's into Paradise over the past several weeks with ZERO responses.
--- End quote ---
You do know that Bryan and Susan have been out of town visiting family and on vacation for several weeks, right?
Paradise isn't Bryan and Susan's full time job. Bryan works in a hospital and Susan is busy with their young child and handling the packing/shipping/billing adjustments.
--- Quote from: MTPPC on September 06, 2012, 11:33:54 am ---I, too, had a bad experience with Paradise where they let me hang for a week and then lied to me about a shipment to buy time.
--- End quote ---
Lied is pretty strong. I know that Susan has gotten things mixed up a few times, but I don't believe there was any intent to mislead or defraud. Paradise is NOT RAM Scam Controls.
I've placed a half-dozen orders with them and when there has been a minor mix-up, Susan has fixed it.
One time, a product was restocked several days after I placed an order. At my request, Susan adjusted my order to add the product, saving me a separate shipping charge. :applaud:
Some of the orders took several weeks to process and ship, but that is the absolute worst I can say about my experiences with Paradise.
I know that Bryan is working on streamlining and improving order processing.
Given how much he contributes to the hobby, I'll be patient and give them the benefit of the doubt.
Scott
iserian:
They are back ;) I spoke with Susan and she is putting together two pairs of RGB sticks for my 3 way Cocktail as we speak.
MTPPC:
--- Quote from: PL1 on September 06, 2012, 04:27:07 pm ---
--- Quote from: iserian on September 06, 2012, 11:01:56 am ---From a patience standpoint I have several email's into Paradise over the past several weeks with ZERO responses.
--- End quote ---
You do know that Bryan and Susan have been out of town visiting family and on vacation for several weeks, right?
Paradise isn't Bryan and Susan's full time job. Bryan works in a hospital and Susan is busy with their young child and handling the packing/shipping/billing adjustments.
--- Quote from: MTPPC on September 06, 2012, 11:33:54 am ---I, too, had a bad experience with Paradise where they let me hang for a week and then lied to me about a shipment to buy time.
--- End quote ---
Lied is pretty strong. I know that Susan has gotten things mixed up a few times, but I don't believe there was any intent to mislead or defraud. Paradise is NOT RAM Scam Controls.
I've placed a half-dozen orders with them and when there has been a minor mix-up, Susan has fixed it.
One time, a product was restocked several days after I placed an order. At my request, Susan adjusted my order to add the product, saving me a separate shipping charge. :applaud:
Some of the orders took several weeks to process and ship, but that is the absolute worst I can say about my experiences with Paradise.
I know that Bryan is working on streamlining and improving order processing.
Given how much he contributes to the hobby, I'll be patient and give them the benefit of the doubt.
Scott
--- End quote ---
Susan lied to me.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version