Main > Main Forum
Adding controllers to front of cab- holders, like on a kiosk?
Well Fed Games:
OK, so I am considering a project involving Pac Man Vs., the somewhat forgotten multiplayer Gamecube/GBA game (at least they re-released it on one of the DS Namco collections).
I was wanting to get some thoughts on how you would attach controllers to the front of a cab- obviously the closer I could get to the kiosks (like in GameKing's sweet collection: http://forum.arcadecontrols.com/index.php/topic,121742.msg1291643.html#msg1291643), the better. If nothing else, just hooks to put the controllers/GBA on while not being used, would be cool. The game involves the players trading controllers a lot, so that is where the challenge comes in. These would be standard original GC controllers and an original GBA. Anybody have thoughts or experience from a similar project?
Nephasth:
Flexible PVC pipe?
Or flexible exhaust tubing?
Well Fed Games:
I definitely like the idea of covering the cables, those pics look better than the tubing I was imagining. I wonder if it would be sturdy enough to let them hang, and if it would need to be connected to the controller body somehow...
Nephasth:
--- Quote from: Well Fed Games on August 04, 2012, 01:23:34 pm ---I definitely like the idea of covering the cables, those pics look better than the tubing I was imagining. I wonder if it would be sturdy enough to let them hang, and if it would need to be connected to the controller body somehow...
--- End quote ---
You'd definitely want to connect the controller body somehow. I know the exhaust flex pipe is plenty sturdy to let a controller hang off the end of it.
RandyT:
--- Quote from: Well Fed Games on August 04, 2012, 12:08:32 pm ---OK, so I am considering a project involving Pac Man Vs., the somewhat forgotten multiplayer Gamecube/GBA game (at least they re-released it on one of the DS Namco collections).
I was wanting to get some thoughts on how you would attach controllers to the front of a cab- obviously the closer I could get to the kiosks (like in GameKing's sweet collection: http://forum.arcadecontrols.com/index.php/topic,121742.msg1291643.html#msg1291643), the better. If nothing else, just hooks to put the controllers/GBA on while not being used, would be cool. The game involves the players trading controllers a lot, so that is where the challenge comes in. These would be standard original GC controllers and an original GBA. Anybody have thoughts or experience from a similar project?
--- End quote ---
I've never been a fan of the fixed controller jutting out from the commercial kiosks. I understand the necessity for them in that environment, but unless they were adjustable in height, I couldn't imagine playing games on them for very long.
Perhaps you could make a small platform for each, cut to fit the inside contour of the controller, and extending from the cabinet on a short piece of tubular steel, or in any configuration you think looks good. Make the top of the platform from sheet metal and glue a couple of small but powerful magnets to the back of the "plus" and analog sections of the controller. You could also inset mating magnets into the platform so the control rights itself neatly when placed onto it. Cable management would be the next thing to consider. If you have space inside the front of the cabinet, you could put a small, grommeted hole (not rubber) in the cabinet, directly behind where the platform is positioned. You could then use a closed pulley (to keep the wire from jumping off) and a small weight attached to the cable. You would want just enough weight to reliably pull in the excess cable, but not make the player feel like the controller is being pulled from their hands.
If you were to attach the platform to the underside of the tube steel, and get a plastic plug cap for the end, it could be partially slotted and the cord can be pulled through that.
See the diagram for a rough idea.
RandyT
Navigation
[0] Message Index
[#] Next page
Go to full version