Main > Main Forum
Let's See Those Toolboxes & Workbenches!
PL1:
--- Quote from: RyoriNoTetsujin on February 12, 2013, 05:58:49 pm ---Don't know how to use most of it, but it's mine, damnit!
--- End quote ---
Easy stuff, Christopher. Here's what you need to know.
* DCV - DC Voltage (used to test live circuit)
* ACV - AC Voltage (used to test live circuit)
* Diode Check - black lead by the band, red on the other end should read as a short and if you swap leads it should read as an open (test with no power applied)
* K Ohms - For measuring resistors/potentiometers (test with no power applied)
* Cont (Continuity) - For checking wires/direct connections. Meter beeps when it measures a direct connection <~2 Ohms. (test with no power applied)
Scott
Nephasth:
--- Quote from: PL1 on February 12, 2013, 06:51:45 pm ---* Diode Check - black lead by the band, red on the other end should read as a short and if you swap leads it should read as an open (test with no power applied)
--- End quote ---
Will also dimly light LEDs to verify which lead is positive on the LED.
mcseforsale:
AC V alternating current...such as your house.
DC V direct current...such as USB, PC power supply output, batteries, etc.
AJ
RyoriNoTetsujin:
Thanks for the quick tips! I'm hitting some YouTube tutorials now too.
danny_galaga:
Making the CP
Where I built the cab
I kid you not ;D
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version