Main > Main Forum

Tightening down ball top?

(1/2) > >>

spkywlnt73:
Hey guys, this maybe a dumb question, but how do you tighten down a ball top on a joystick? I've tried wrapping it with a clothe and grabing it with a pair of plyers. But it seems to allways come loose! Any thoughts or suggestions? Thanks!

Nephasth:
Is there a slot on the other end of the shaft? If so, put a flat head screwdriver in the slot to hold the shaft while tightening the ball. If you really want it to stay on there, put Loctite 271 or 242 on the threads.

spkywlnt73:

--- Quote from: Nephasth on April 13, 2012, 06:56:44 pm ---Is there a slot on the other end of the shaft? If so, put a flat head screwdriver in the slot to hold the shaft while tightening the ball. If you really want it to stay on there, put Loctite 271 or 242 on the threads.

--- End quote ---
HaHa! Thats pretty funny dude! I never even knew about the slot on the other end. Thanks!

AndyWarne:
Plumbers teflon tape works well, wrapped around the threads.

Another tip on joystick tops, they can be polished with toothpaste, works great and really makes them shine!

wivelden:

--- Quote from: AndyWarne on April 14, 2012, 08:02:35 am ---Plumbers teflon tape works well, wrapped around the threads.

Another tip on joystick tops, they can be polished with toothpaste, works great and really makes them shine!

--- End quote ---

Now thats a good tip. I was wondering how to polish mine when I finish my cab.  :applaud:

Navigation

[0] Message Index

[#] Next page

Go to full version