Software Support > GroovyMAME

strange magic resolution behavior

<< < (2/3) > >>

ahofle:
Well the monitor limits certainly don't look right.  Should be 15khz - 38khz.  Attached the verbose debug output.

Calamity:
Hi ahofle,

The monitor ranges are fine, if you look through the log you'll see how the 15-38kHz range is subdivided in separate smaller ranges where different settings apply, as indicated by the monitor_specs lines.

However, I've just noticed that the monitor_specs2 range is wrong for the D9800/D9400, and it's different from what's stated in the Monitor presets thread. I remind having modified it for VMMaker but it seems the definition inside GroovyMAME is not updated. By now, try adding this line into mame.ini:

monitor_specs2    20001-29000, 40-80, 2.910, 3.000, 4.440, 0.451, 0.164, 1.048, 0, 0, 384, 576

This should make the 288-384 lines modes available for GroovyMAME.

ahofle:
Thanks.  I tried adding that line (and commenting out the existing specs2 one) and it's still behaving the same (picking the 576 line interlaced res).  My monitor_specs0 and monitor_specs1 lines are both set to auto, is that right?  Attached the log.

Calamity:
Well, something is wrong definitely as the log still shows the old default range:

SwitchRes: MonitorLimits 20501.00-29000.00,40.00-80.00,2.910,3.000,4.440,0.451,0.164,1.048,0,0,480.0,768

Also make sure to grab a newer GroovyMAME build, there was a bug in some older versions that didn't pick the ranges from mame.ini (just picked the first one or something).

Yes leave the others as auto.

ahofle:
I'm using 0.144...is there a more recent version?

Navigation

[0] Message Index

[#] Next page

[*] Previous page