Software Support > GroovyMAME
Universal chassis arrives (and so do the problems & questions)
Calamity:
This will show you the geometry issues I found in my Hantarex Polostar. If you look at the grid and follow the lines individually, you'll notice how the sign of the curvature changes twice across the screen, instead of just once in the center. This causes that a rectangle in the middle of the screen will be concave, but if it's on the exterior of the screen it will be convex (it becomes obvious on MAME's nag screens).
BTW: I've attached a beta version of VMMaker with sync polarities support implemented. Check included ini for info.
lettuce:
Does Sega Rally, work in Mame now then?
Paradroid:
--- Quote from: Calamity on February 25, 2012, 10:04:26 am ---If you look at the grid and follow the lines individually, you'll notice how the sign of the curvature changes twice across the screen, instead of just once in the center.
--- End quote ---
Yep, I see that. Frustrating! Still, your setup has better geometry than this Sharp Image. At least the borders meet the edge of the screen properly with your Hantarex. I'll try to get some pictures up today so you guys can see how a $10 SCART TV compares to a $240 arcade chassis. :)
Oh, and thanks for the beta! I'll definitely give it a spin today! ;D
Paradroid:
Okay. My SLR camera had a flat battery so I had to use my phone. Please excuse the quality...
I've got 3 shots to show you guys. The $30 SCART TV is the one with the test grid that doesn't look like it melted in the sun (unlike the $240 arcade chassis). ;)
Calamity:
Long life to the SCART TV :)
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version