Main > Main Forum
Optipac and Rotary Encoder Question
(1/1)
mrlee:
Hi all
I'm looking to replace one of my optical rotary sticks with a happ rotary 12 switch and the ultimarc rotary encoder.
I already have an optipac for the trackball, but will both encoders clash or not work with each other, I'm sure I heard somewhere that you cant use both??
Many thanks in advance
TopJimmyCooks:
With the optipac you can put the trackball on X/Y and your rotary stick on the Z axis. Under latemodel Mame and win 7 or XP, the z axis is 4.xx times more sensitive than x or y. urebelscum gave us one line in the mame source that can be changed to fix this before you compile mame. I have a spinner on z (with the mame code edit) and TB on the same optiwiz xy and everything's awesome.
this thread, reply #20 tells what needs to be done.
http://forum.arcadecontrols.com/index.php?topic=75693.0
mrlee:
Thank you :cheers:
bkenobi:
Does this answer the OP's question? I wasn't aware that you could set a mechanical rotary as though it was the z-axis on a joystick (analog), so I'm just curious when that happened... As far as I knew, the mechanical rotaries send a left/right rotation button press rather than a position, so this sounds a bit odd. Maybe I'm misunderstanding how the Ultimarc rotary encoder is set up. :dunno
mrlee:
I just used the Happ Rotary (mechanical) and the Ultimarc encoder, worked great. No problems with the Optipac as well :)
Navigation
[0] Message Index
Go to full version