Arcade Collecting > Pinball
Other home model pinball machines
Pinball Wizard:
Ken, can you drop me an email at pinwiki (Att) pinwiki.com?
ed12:
ken i get your point
do a fav here
slap down some play feild shot >under of course<
and i woul be more then happy to go with u on this path
fully get your idea,and your quest,have book marked the wiki page
but post here when u update
as i said under the playfeild,i can and will tweak in the flipper's,coil's etc
ed
Ken Layton:
The problem is that I don't have/own any of these machines. Without actually having a particular machine in front of me, it makes it a little hard to put together a comprehensive repair guide and cross reference the actual part numbers of the parts in the machine. I've only got a friend with a non-working Bally Captain Fantastic home model waiting for a Pinball Mind replacement cpu board that I can refer to.
If I had these machines in front of me then I could photograph it, add to the wiring information, draw schematics if needed, and figure out the mods/improvements.
ed12:
Hi Ken
a bud of mine has a elvis pinball made by brunswick
i am sure it's 24 volt colis
the mpu is rockwell >gottileb< system1 style >spider chip<.
A dealer i am repairing a nsm juke for also has a home pinball style game
if it is any use to u i could offer to them the chance to up-grade.??
so we could get requested pix's,on a side note here
i do believe i still have my adrmial home pinball machine manual's
which were of course were chopped down rockwell system1,if i do i may beable to upload them in pdf,i will chk tonight
ed
ed12:
well well pinballjim
u are in luck
guess what i am looking at ?
the complete service set manual's for bally home pinball game's
ie fireball
and guess what i was right there 24 volt coil's
the mpu is 3850 that chip was made by pelsey
u guy's want scan's ? it is in total 3 manual's
1 is game play setup etc
1 is part's
1 is service
if u want ring the bell
ed
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version