Main > Main Forum

Thinking about buying a Candy Cab and could use some guidance

<< < (2/2)

JoeB:

--- Quote from: emphatic on February 05, 2012, 06:27:44 pm ---The EGRET II's have the advantage that you can easily remove the control panel making it really easy to get through narrow doorways, for the NAC you need to remove the whole front of the cabinet to do so. It also seem to have lots more space inside (I've had a 110-220 Transformer, a sub woofer an XBox 360 with pad hack + an UVC and a PC inside one of mine EGRET II's simultaneously before. Sure, if you mount a PC on the wooden PCB mounting board that usually comes with the cabinet there should be trouble with a NAC for that use.

--- End quote ---

What do you mean by trouble for that use? I got a miniATX MB + PSU + JPAC + HD mounted inside my NAC on the wooden board.  All using plastic feet.

Franco B:

--- Quote from: emphatic on February 05, 2012, 06:27:44 pm ---The EGRET II's have the advantage that you can easily remove the control panel making it really easy to get through narrow doorways, for the NAC you need to remove the whole front of the cabinet to do so.

--- End quote ---

---That which is odiferous and causeth plants to grow---

The NAC CP is the same width as the rest of the cab and so if you can get the body though you can get the CP though too ;)

Yes, the NAC may be a little more cramped on the inside but hey, these things were designed to run PCBs  ;D

JoeB:
Agreed. 

With a north american woody, 80%+ of the cab is empty space!  Not only can you fit a PC + subwoofer in there, but even a bar fridge!

Navigation

[0] Message Index

[*] Previous page

Go to full version