Main > Main Forum
Ledblinky Mame missing something
spkywlnt73:
Well, I finally got ledblinky to work with my setup, and already configured a couple of emulators. Here's my problem! First, let me start off by saying on my control panel I have 8 buttons per player. It reconizes all the player 1 buttons, but in player 2 its not lighting up 4 of the buttons. Would I have to change something in an "ini" file somewhere? Hope this makes sense!
Nephasth:
Are those 4 buttons mapped to P2 controls in MAME (in the tab menu)? If they are, have you assigned those LEDs in LEDBlinky (I assume you have after seeing your pics of your panel)?
spkywlnt73:
--- Quote from: Nephasth on January 31, 2012, 04:42:29 pm ---Are those 4 buttons mapped to P2 controls in MAME (in the tab menu)? If they are, have you assigned those LEDs in LEDBlinky (I assume you have after seeing your pics of your panel)?
--- End quote ---
Yeah, I went in to streetfighter 2 and hit tab, and assigned those buttons (well two of those buttons anyway just to see if it worked) And I set the LEDs in LEDBlinky, rebooted and nothing! My button layout for Mame is kinda different, If you're looking at my controlpanel Player 1 the button layout is as follows.....Starting across the top from left to right B7, B1, B2, B3. Bottom row L/R B8, --BINGO! Either that, or I was attempting to say "before" but it was too many letters to type--, B5, B6. Player 2 is set up the same way, so on player 2 it would be B5, B6, B7, and B8 that don't light up! Whew! Hope you got all that. :dunno
Nephasth:
Go into the main tab menu and map all of P2's buttons. Another thing to try would be to go into LEDBlinky's Config (? I think, whatever the one is called where you first set up the LEDs) and make sure those LEDs light as you select them, if not, you may have a loose connection.
spkywlnt73:
--- Quote from: Nephasth on January 31, 2012, 05:21:42 pm ---Go into the main tab menu and map all of P2's buttons. Another thing to try would be to go into LEDBlinky's Config (? I think, whatever the one is called where you first set up the LEDs) and make sure those LEDs light as you select them, if not, you may have a loose connection.
--- End quote ---
Well I know the LEDs work because when I do the random light display, they blink. So I can rule out loose wire. I went into the main tab menu and did like you suggested, but still nothing. The commands are working when I enter them, and they register in game play. I don't get it! Ya got any other ideas?
Navigation
[0] Message Index
[#] Next page
Go to full version