Main > Main Forum

How to power a neon license plate frame?

<< < (2/3) > >>

Nephasth:
Yea, wire it up to 12V from the cab's power supply.

Mario:
Is it real or fake neon? I believe real neon would require a fairly high amperage to initially light it, and a PC/cab's power supply may not be powerful enough, or it may blow. If I were you, I'd either try it with a spare power supply, or use a separate supply.

Mario

Malenko:

--- Quote from: Mario on January 02, 2012, 10:40:11 pm ---Is it real or fake neon? I believe real neon would require a fairly high amperage to initially light it, and a PC/cab's power supply may not be powerful enough, or it may blow. If I were you, I'd either try it with a spare power supply, or use a separate supply.

Mario


--- End quote ---

its most likely a cold cathode

pinballwizard79:
I'm a total noob with dedicated arcades.

They have a 12v power supply?

Really?

So I can just grab the wire, splice into it & then habe both game/license plate powered?

Are we talking about the marquee fixture wire or something different?

BobA:
x2 says this will power any light they sell.

12 wall wart

The one you listed earlier is cheaper and has 2x the amperage at 12V.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version