Arcade Collecting > Pinball

Bally home pinball model service information

<< < (9/10) > >>

Ken Layton:
Updating this old thread. The original designer of the "Pinball Mind" board passed away from cancer several years ago. His work, drawings, designs, etc were turned over to Marco Specialties who promptly did absolutely nothing and shelved it. So that's how things sit right now.

If anyone would like to design new modern boards for the Bally home model pinball machines, PLEASE DO IT. A modern replacement board is sorely needed. John Robertson at flippers.com has made some replacement cpu chips to bring the original boards back to life.

ed12:
ken
do u know which micro he used ?
or would like just to call john and ask ?
maybe i can help as i do have all of the admiral (bally-home-pin) stuff

ed

Ken Layton:
I believe the cpu chip he was using was a 65C02.

Here is an archive of his site:

http://web.archive.org/web/20120827232720/http://www.nightmarepark.com/Pinball%20Mind.html

Attached is a 3D drawing of the board. I do have the board schematics Tony had drawn up, but it's a 500K pdf and forum file size restrictions prohibit it. I could email it though.

ed12:
please do
i was  looking for the sdk also

ed

Ken Layton:
A better archived webpage has been found and it has the high quality pictures of the board still there.

http://web.archive.org/web/20141208105120/http://aleg.eu01.aws.af.cm/tony/Pinball%20Mind.html

Navigation

[0] Message Index

[#] Next page

[*] Previous page