Main > Main Forum

Monitor wiring-Quick Help!

<< < (4/6) > >>

Nephasth:
Which pin do your have your composite sync signal connected to on the monitor's input header?


honkey:

--- Quote from: Nephasth on December 21, 2011, 02:16:07 am ---Which pin do your have your composite sync signal connected to on the monitor's input header?




--- End quote ---

Looks like -H.Sync

It had a great picture when the Tekken PCB was in there, but I sold the board last week.

Nephasth:
Ok, we have got bits and pieces of information here and there. In my B/S/T thread you said you are using a J-pac. If you are, you shouldn't need to hack or make your own cable, just use a VGA cable to go from your computer to your J-pac. You're composite sync is connected to -H Sync on the monitor, which should be fine. But what are you using for a video card? An ArcadeVGA? Or are you using Soft15khz?

honkey:
I am using Soft15khz, but I am not the one with a J-PAC.video card is an ATI Radeon HD 4830. In that YouTube video of my problem, I had the setting to 512x448.

Nephasth:

--- Quote from: honkey on December 21, 2011, 05:43:00 pm ---I am using Soft15khz, but I am not the one with a J-PAC.video card is an ATI Radeon HD 4830. In that YouTube video of my problem, I had the setting to 512x448.

--- End quote ---

Sorry for the confusion... Hmm, was that the best you could get the monitor? Have you tried with the resolution at 640x480?

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version