Software Support > GroovyMAME

any chance of a newer CRT-Emudriver based on 11?

(1/2) > >>

androtaz08:
I love the custom drivers but They seem to run most other more graphic card intensive emulators really slowly. With the current drivers I can play MVSC2 perfect on demul or makaron. But with using the older catalyst they slow right down. are there limitations with using a newer version as a base for crt-emudriver

Calamity:
Hi adrotaz08,

I have no experience with Catalyst 11, however the key question here is if modern versions of the driver support the same old method for defining custom video modes that we use with the old Catalyst 9 (same registry keys and format).

Basically, if Soft-15khz works with those drivers then it's likely that VMMaker will work too, as VMMaker actually uses the same registry methods documented by SailorSat.

Have a look at this thread:

http://forum.arcadecontrols.com/index.php?topic=114551.0

You might help us by testing VMMaker with Catalyst 11. In order to do that edit VMMaker.ini and enable the "AnyCatalyst" option and set "TotalModes = 60".

Even if it works, you'll be limited to 60 video modes. And I can't say if the dynamic modeline support (the key feature which GroovyMAME exploits) will even work. Finally, the "magic modeline" feature, which definitely is a damned hack, may easily blue-screen your system with those untested drivers.

If all that worked, then there could be a good reason at some point to try and  patch a newer version of Catalyst, which is a horribly tedious and uncertain task, just to remove the 60 modelines limit, however I don't know if I'd be able to gather the energies to go through the process again, specially considering the amount of work that GroovyMAME still needs before things finally work as they should.

newmanfamilyvlogs:

--- Quote from: androtaz08 on November 06, 2011, 11:09:40 am ---I love the custom drivers but They seem to run most other more graphic card intensive emulators really slowly. With the current drivers I can play MVSC2 perfect on demul or makaron. But with using the older catalyst they slow right down. are there limitations with using a newer version as a base for crt-emudriver

--- End quote ---

What's the rest of your system? I'm running his drivers on a very modest HD4250 can can run MVSC2 on Makaron just fine, as well as NullDC for may other games. Even SFIVAE runs fine.

androtaz08:
amd64x2 3.0 4 gig of ram and an hd4350 card.

caskad:
Hello,

Just tested under Xp  with no result.

Xp doesnt load anymore :s

 :badmood:

Navigation

[0] Message Index

[#] Next page