Main > Main Forum
Ideas for a simple removable control panel ?
spystyle:
Hello from Maine,
Well I am building a Defender (again) with detachable control panels that store in the back of the cabinet. This is possible because the control panel fits inside the cabinet (the panel's o.d. is the same as the cabinet's i.d.)
So I am thinking of making it all simple, like the coin door panel can open, inside there are 2 latches to unlock the control panel, releasing it. I am thinking of using window latches.
Do you guys have any ideas that totally trump my simple one ? I know y'all are creative :)
Thanks!
Craig
emphatic:
Scroll down this page for some products: http://www.arcadeshop.de/index.php?cPath=83_90&sort=2a&page=2
Donkbaca:
This is what I would do.
ecndoer in the cab, wired to cat 5. CP buttons wired to cat 5. When you put CP on, you just plug in the cat 5 wires. Simple.
To secure the top, I would use Velcro. Its surprisingly sturdy
spystyle:
Thanks for chiming in fellas :)
alfonzotan:
I can't quite picture from your description what you have in mind, but this is how I connected a removable (much more, um, elaborate) panel recently:
http://forum.arcadecontrols.com/index.php?topic=111782.msg1187362#msg1187362
In the finished cab, an extension USB cable is hanging right behind the hole in the center of the back panel. Plug that in to a USB cable from the back of the CP, line up on the brackets, and slide the panel box into place. Done.
Navigation
[0] Message Index
[#] Next page
Go to full version