Main > Main Forum

USB panel mount

<< < (2/2)

Evetsllub:

--- Quote from: mytymaus007 on July 03, 2011, 08:56:08 pm ---
--- Quote from: Evetsllub on July 03, 2011, 07:48:26 pm ---I got some like that. You can actually unscrew the housing off it and then screw it from inside the cab. You will need to cut a small hole that is a 'slit' sort of hole that the USB will pole through. This will give you a really clean finish. Difficult to describe, I'll try to take a photo of it. Hardest part of it is cutting the shape of the hole. If you have a dremel this will be simple though.

--- End quote ---

would love to see some pics i just order some for my cab

--- End quote ---

Here you go:

This is what the back of them looks like (assuming yours are the same as mine):



Pull those 2 screws out and the case comes off and this is what you're left with:



Shouldnt be too difficult to cut out a slot like hole to stick the 'normal' usb end through on the outside of your cab, and then use the screw holes to screw into the inside of your cab.  I havent done it yet but i'll give it a go.

mytymaus007:

--- Quote from: Evetsllub on July 07, 2011, 06:57:56 am ---
--- Quote from: mytymaus007 on July 03, 2011, 08:56:08 pm ---
--- Quote from: Evetsllub on July 03, 2011, 07:48:26 pm ---I got some like that. You can actually unscrew the housing off it and then screw it from inside the cab. You will need to cut a small hole that is a 'slit' sort of hole that the USB will pole through. This will give you a really clean finish. Difficult to describe, I'll try to take a photo of it. Hardest part of it is cutting the shape of the hole. If you have a dremel this will be simple though.

--- End quote ---

would love to see some pics i just order some for my cab

--- End quote ---

Here you go:

This is what the back of them looks like (assuming yours are the same as mine):



Pull those 2 screws out and the case comes off and this is what you're left with:



Shouldnt be too difficult to cut out a slot like hole to stick the 'normal' usb end through on the outside of your cab, and then use the screw holes to screw into the inside of your cab.  I havent done it yet but i'll give it a go.

--- End quote ---


I ordered 2 should be in soon cant wait they look good i got the black ones

Navigation

[0] Message Index

[*] Previous page

Go to full version