Main > Main Forum

Mounting Sanwa's into 3/4" MDF

<< < (3/3)

severdhed:
i mounted my JLWs in 5/8" mdf (with 1/8" plexi on top)...i routed out an area on the bottom of the panel, about half the thickness of the board and bottom mounted them.  i used bolts, countersunk on the top, that sit under the plexi. this panel has been in place for a while now, and has been abused by quite a few children and they are holding up strong.

Navigation

[0] Message Index

[*] Previous page

Go to full version