Main > Main Forum

CGA/EGA to VGA Converter - Golden Tee

<< < (2/2)

lilshawn:
really, the problem is that the screen resolution output buy the GT video card is 320x200 where the resolution output by video cards through windows is actually 321x200 therefore some monitors won't even sync to the odd size.

even so, most monitors have completely eliminated  the low resolution frequencies all together. televisions have eliminated everything below 640x480 some wont even accept anything less than 800x600

mdwg2020:
So now it doesn't jump anymore, but freezes the picture completely. For some reason, no matter what I do at this point, I can't even make it behave the way it did previously (showing the screen, and playing just very jumpy). I don't really get it.

Do you think wiring it to the 8-pin connector would somehow work any better than the 5 pin-connector? I used the 5-pin connector because the Jamma harness already has a connector wired that I can plug directly to the 5-pin. I believe Golden Tee only uses composite sync since there is only one sync wire and it is just listed as sync in the pinout from the Golden Tee manual.

mickkn:
Where there ever, any solution to this?

Navigation

[0] Message Index

[*] Previous page

Go to full version