Main > Main Forum
An appeal to Andy at Ultimarc
Dervacumen:
--- Quote from: Kevin Mullins on March 06, 2011, 05:46:15 pm ---I'd roll'em with a pair of needlenose pliers, add a wisp of solder and call it good .... ;D
--- End quote ---
I've found this to be the quickest and most cost effective method but I skip the solder part depending on the application. For example I'm building a one time use cable and need to crimp 3 wires. I don't go through the 5 minutes of warm up and set up for my soldering equipment. For longer term applications I solder as well. I crimp something this size maybe 20 times a year. Using needle nose pliers instead of the D style crimper is just a little easier. Same concept though.
Navigation
[0] Message Index
[*] Previous page
Go to full version