Main > Main Forum

Happ buttons are too long!

<< < (2/3) > >>

justinjstark:

--- Quote from: LeedsFan on October 29, 2010, 05:24:41 pm ---
--- Quote from: justinjstark on October 29, 2010, 04:33:46 pm ---
--- Quote from: leapinlew on October 29, 2010, 03:57:27 pm ---how many buttons and what is their function? If they are for admin functionality, I would suggest using some smaller buttons. Any momentary contact button will work.

--- End quote ---

Why didn't I think of this?  I saw these momentary contact buttons from happ but didn't realize they would be fine for admin buttons.

http://www.happcontrols.com/pushbuttons/601200xx.htm

The colors are a bit weird.  I would like white or black ones.   :dunno

The threads are shallower than my 1/2" wood but I can route it down to 5/8" around the button nuts.  Fantastic.

--- End quote ---

They look suspiciously like Sanwa OBSN-24's. The dimensions seem exactly the same, the switches look exactly the same and the colour range available is..... exactly the same!  ;)

--- End quote ---

BurgerKingDiamond:
Like LeapinLew said, any momentary push button will work. I used this button from Radio Shack as a coin button on my Jamma cab.

http://www.radioshack.com/product/index.jsp?productId=2062510

It's tiny, and the red button/black bezel happened to match my cp buttons.  I actually think it's better to use something other than regular buttons for admin functions.

justinjstark:
Lizard Lick has these Seimitsu pushbuttons which come in better colors.

Q*Bert_OP:

--- Quote from: LeedsFan on October 29, 2010, 05:24:41 pm ---
--- Quote from: justinjstark on October 29, 2010, 04:33:46 pm ---
--- Quote from: leapinlew on October 29, 2010, 03:57:27 pm ---how many buttons and what is their function? If they are for admin functionality, I would suggest using some smaller buttons. Any momentary contact button will work.

--- End quote ---

Why didn't I think of this?  I saw these momentary contact buttons from happ but didn't realize they would be fine for admin buttons.

http://www.happcontrols.com/pushbuttons/601200xx.htm

The threads are shallower than my 1/2" wood but I can route it down to 5/8" around the button nuts.  Fantastic.

--- End quote ---

They look suspiciously like Sanwa OBSN-24's. The dimensions seem exactly the same, the switches look exactly the same and the colour range available is..... exactly the same!  ;)

--- End quote ---

I've bought those before...they are Sanwa.

LeedsFan:

--- Quote from: Q*Bert_24/7 on October 29, 2010, 10:32:07 pm ---
--- Quote from: LeedsFan on October 29, 2010, 05:24:41 pm ---
--- Quote from: justinjstark on October 29, 2010, 04:33:46 pm ---
--- Quote from: leapinlew on October 29, 2010, 03:57:27 pm ---how many buttons and what is their function? If they are for admin functionality, I would suggest using some smaller buttons. Any momentary contact button will work.

--- End quote ---

Why didn't I think of this?  I saw these momentary contact buttons from happ but didn't realize they would be fine for admin buttons.

http://www.happcontrols.com/pushbuttons/601200xx.htm

The threads are shallower than my 1/2" wood but I can route it down to 5/8" around the button nuts.  Fantastic.

--- End quote ---

They look suspiciously like Sanwa OBSN-24's. The dimensions seem exactly the same, the switches look exactly the same and the colour range available is..... exactly the same!  ;)

--- End quote ---

I've bought those before...they are Sanwa.

--- End quote ---

Well in that case they won't just be fine for "admin buttons"... they are vastly superior to Happ's own buttons for gameplay.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version