Software Support > GroovyMAME
Switchres: modeline generator engine
ves:
Hi, I have everything compiled but I can not even try, I have several questions, where is the lrm.conf? I have not found on any site, when you say to try the "Clock = 3.75 - 25 / 15625-16650 / 49.50 - 65.00" This is put in the xorg.conf, right?
I would have to change
--- Code: ---HorizSync 15.625 - 16.650
VertRefresh 49.00 - 65.00
--------------------------------------------
Option "ForceMinDotClock" "3.75MHz"
--- End code ---
When creating the xorg.conf me to believe so, I have given the following options "genres -cga -ff"
--- Code: ---Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
#Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
Option "BlankTime" "0"
Option "StandbyTime" "0"
Option "SuspendTime" "0"
Option "OffTime" "0"
Option "NoPM" "True"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/OTF"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
EndSection
Section "Module"
#Load "FGL.renamed.libglx"
Load "glx"
Load "extmod"
Load "dbe"
Load "dri2"
Load "dri"
Load "record"
SubSection "extmod"
Option "omit DPMS"
EndSubSection
EndSection
Section "ServerFlags"
Option "AIGLX" "on"
AllowMouseOpenFail
Option "Dont Zoom"
Option "NoDDC"
Option "UseEdidFreqs" "0"
Option "IgnoreEDID" "1"
Option "TMDS" "0"
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Wells Gardner"
ModelName "D9800"
HorizSync 15.250 - 16.75, 24.00 - 26.00, 31.00 - 32.00, 37-40
VertRefresh 47.00 - 85.00
Option "DPMS" "false"
EndSection
Section "Device"
Option "ForceMinDotClock" "5MHz"
Option "ModeDebug" "true"
Option "NoDDC"
Option "IgnoreEDID" "on"
#
Option "ArcadeMonitor" "d9800"
#
Identifier "Card0"
Driver "radeon"
VendorName "ATI Technologies Inc"
BoardName "Unknown Board"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "800x576x24.96" "792x480x30.00" "768x256x56.25" "768x240x60.11" "760x576x25.04" "744x486x29.66" "744x288x50.00" "744x240x60.11" "736x264x54.50" "720x480x30.00" "720x240x60.11" "712x512x28.07" "712x288x50.00" "704x480x30.00" "704x240x60.11" "696x488x29.66" "696x480x30.00" "688x512x28.07" "688x500x28.79" "672x524x27.49" "672x506x28.58" "672x480x30.00" "672x240x60.11" "656x240x60.11" "648x504x28.58" "648x502x28.69" "648x498x28.79" "648x240x60.11" "640x482x30.00" "640x480x30.00" "640x478x30.00" "640x288x50.00" "640x256x56.25" "640x240x60.11" "632x496x29.01" "632x478x30.00" "624x524x27.58" "624x486x29.66" "624x480x30.00" "624x478x30.00" "616x558x25.78" "616x480x30.00" "616x288x50.00" "608x480x30.00" "600x288x50.00" "600x240x60.11" "592x532x27.02" "592x480x30.00" "584x520x27.58" "576x578x25.04" "576x518x27.78" "576x504x28.58" "576x288x50.00" "568x480x30.00" "568x478x30.00" "560x504x28.58" "560x502x28.79" "560x500x28.90" "560x498x28.79" "560x484x29.77" "560x280x51.47" "560x243x59.21" "552x496x29.01" "552x480x30.00" "552x240x60.11" "544x486x29.55" "544x480x30.00" "544x240x60.11" "536x514x28.07" "536x482x29.89" "536x478x30.00" "536x240x60.11" "528x488x29.55" "528x480x30.00" "528x478x30.00" "528x288x50.00" "528x261x55.07" "528x245x58.77" "528x244x58.99" "528x240x60.11" "520x504x28.69" "520x240x60.11" "512x576x24.96" "512x512x28.07" "512x504x28.58" "512x480x30.00" "512x288x50.00" "512x256x56.25" "512x254x56.65" "512x252x57.07" "512x240x60.11" "504x488x29.55" "504x486x29.66" "504x484x29.66" "504x482x30.00" "504x482x29.89" "504x288x50.00" "504x250x57.69" "496x480x30.00" "496x478x30.00" "496x240x60.11" "488x576x24.96" "488x488x29.66" "488x480x30.00" "480x480x30.00" "480x478x30.00" "480x288x50.00" "480x240x60.11" "472x262x54.88" "472x243x59.21" "464x288x50.00" "464x261x55.07" "464x248x58.12" "464x240x60.11" "456x578x24.96" "456x576x24.96" "456x512x28.07" "456x480x30.00" "456x288x50.00" "456x256x56.25" "456x255x56.45" "456x252x57.07" "448x252x57.07" "448x251x57.48" "448x240x60.11" "440x257x56.05" "440x256x56.25" "440x253x56.86" "440x252x57.07" "432x512x28.07" "432x288x50.00" "432x280x51.47" "432x276x52.15" "432x264x54.50" "432x257x56.05" "432x256x56.25" "432x253x56.86" "432x252x57.07" "432x251x57.48" "432x248x58.12" "432x240x60.11" "424x512x28.07" "424x480x30.00" "424x288x50.00" "424x272x52.85" "416x288x50.00" "416x267x53.94" "416x266x54.12" "416x262x54.88" "416x256x56.25" "416x243x59.21" "416x241x59.66" "416x240x60.11" "408x266x54.12" "408x253x56.86" "408x252x57.07" "408x240x60.11" "400x512x28.07" "400x288x50.00" "400x280x51.47" "400x272x52.85" "400x264x54.50" "400x260x55.46" "400x257x56.05" "400x256x56.25" "400x253x56.86" "400x252x57.07" "400x251x57.48" "400x250x57.69" "400x248x58.12" "400x240x60.11" "392x243x59.21" "392x240x60.11" "384x576x24.96" "384x288x50.00" "384x256x56.25" "384x248x58.12" "384x240x60.11" "376x288x50.00" "376x280x51.47" "376x259x55.65" "376x240x60.11" "368x266x54.12" "368x257x56.05" "368x256x56.25" "368x240x60.11" "360x288x50.00" "360x272x52.85" "360x266x54.12" "360x251x57.27" "360x250x57.69" "360x248x58.12" "360x240x60.11" "352x288x50.00" "352x261x55.26" "352x261x55.07" "352x256x56.25" "352x248x58.12" "352x244x58.99" "352x243x59.21" "352x242x59.43" "352x240x60.11" "344x512x28.07" "344x258x55.85" "344x256x56.25" "344x241x59.66" "344x240x60.11" "344x240x59.89" "336x257x56.05" "336x252x57.07" "336x251x57.48" "336x250x57.69" "336x248x58.12" "336x244x58.99" "336x243x59.21" "336x240x60.11" "336x240x59.89" "328x244x58.99" "328x243x59.21" "328x241x59.66" "328x240x60.11" "320x256x56.25" "320x255x56.45" "320x248x58.12" "320x240x60.11" "312x288x50.00" "312x243x59.21" "312x241x59.66" "312x240x60.11" "312x240x59.89" "304x266x54.12" "304x241x59.66" "304x240x60.11" "296x288x50.00" "296x260x55.46" "296x257x56.05" "296x256x56.25" "296x255x56.45" "296x253x56.86" "296x240x60.11" "288x288x50.00" "288x266x54.12" "288x252x57.07" "288x250x57.69" "288x248x58.12" "288x240x60.11" "280x258x55.85" "280x243x59.21" "280x242x59.43" "280x241x59.66" "280x240x60.11" "280x240x59.89" "272x256x56.25" "272x252x57.07" "272x251x57.48" "272x248x58.12" "272x241x59.66" "272x240x60.11" "264x261x55.07" "264x248x58.12" "264x243x59.21" "264x241x59.66" "264x240x60.11"
EndSubSection
EndSection
--- End code ---
Would be correct?
I have seen that there is a folder called modes where might modelines (modes_mame.txt modes.txt) in 2 different formats, this folder is used for something? I mean, the used the genre to make the xorg.conf or you have to use those modelines in the xorg.conf manually?
Greetings.
bitbytebit:
--- Quote from: ves on October 11, 2010, 07:12:50 am ---Hi, I have everything compiled but I can not even try, I have several questions, where is the lrm.conf? I have not found on any site, when you say to try the "Clock = 3.75 - 25 / 15625-16650 / 49.50 - 65.00" This is put in the xorg.conf, right?
I would have to change
--- Code: ---HorizSync 15.625 - 16.650
VertRefresh 49.00 - 65.00
--------------------------------------------
Option "ForceMinDotClock" "3.75MHz"
--- End code ---
When creating the xorg.conf me to believe so, I have given the following options "genres -cga -ff"
--- Code: ---Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
#Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
Option "BlankTime" "0"
Option "StandbyTime" "0"
Option "SuspendTime" "0"
Option "OffTime" "0"
Option "NoPM" "True"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/OTF"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
EndSection
Section "Module"
#Load "FGL.renamed.libglx"
Load "glx"
Load "extmod"
Load "dbe"
Load "dri2"
Load "dri"
Load "record"
SubSection "extmod"
Option "omit DPMS"
EndSubSection
EndSection
Section "ServerFlags"
Option "AIGLX" "on"
AllowMouseOpenFail
Option "Dont Zoom"
Option "NoDDC"
Option "UseEdidFreqs" "0"
Option "IgnoreEDID" "1"
Option "TMDS" "0"
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Wells Gardner"
ModelName "D9800"
HorizSync 15.250 - 16.75, 24.00 - 26.00, 31.00 - 32.00, 37-40
VertRefresh 47.00 - 85.00
Option "DPMS" "false"
EndSection
Section "Device"
Option "ForceMinDotClock" "5MHz"
Option "ModeDebug" "true"
Option "NoDDC"
Option "IgnoreEDID" "on"
#
Option "ArcadeMonitor" "d9800"
#
Identifier "Card0"
Driver "radeon"
VendorName "ATI Technologies Inc"
BoardName "Unknown Board"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "800x576x24.96" "792x480x30.00" "768x256x56.25" "768x240x60.11" "760x576x25.04" "744x486x29.66" "744x288x50.00" "744x240x60.11" "736x264x54.50" "720x480x30.00" "720x240x60.11" "712x512x28.07" "712x288x50.00" "704x480x30.00" "704x240x60.11" "696x488x29.66" "696x480x30.00" "688x512x28.07" "688x500x28.79" "672x524x27.49" "672x506x28.58" "672x480x30.00" "672x240x60.11" "656x240x60.11" "648x504x28.58" "648x502x28.69" "648x498x28.79" "648x240x60.11" "640x482x30.00" "640x480x30.00" "640x478x30.00" "640x288x50.00" "640x256x56.25" "640x240x60.11" "632x496x29.01" "632x478x30.00" "624x524x27.58" "624x486x29.66" "624x480x30.00" "624x478x30.00" "616x558x25.78" "616x480x30.00" "616x288x50.00" "608x480x30.00" "600x288x50.00" "600x240x60.11" "592x532x27.02" "592x480x30.00" "584x520x27.58" "576x578x25.04" "576x518x27.78" "576x504x28.58" "576x288x50.00" "568x480x30.00" "568x478x30.00" "560x504x28.58" "560x502x28.79" "560x500x28.90" "560x498x28.79" "560x484x29.77" "560x280x51.47" "560x243x59.21" "552x496x29.01" "552x480x30.00" "552x240x60.11" "544x486x29.55" "544x480x30.00" "544x240x60.11" "536x514x28.07" "536x482x29.89" "536x478x30.00" "536x240x60.11" "528x488x29.55" "528x480x30.00" "528x478x30.00" "528x288x50.00" "528x261x55.07" "528x245x58.77" "528x244x58.99" "528x240x60.11" "520x504x28.69" "520x240x60.11" "512x576x24.96" "512x512x28.07" "512x504x28.58" "512x480x30.00" "512x288x50.00" "512x256x56.25" "512x254x56.65" "512x252x57.07" "512x240x60.11" "504x488x29.55" "504x486x29.66" "504x484x29.66" "504x482x30.00" "504x482x29.89" "504x288x50.00" "504x250x57.69" "496x480x30.00" "496x478x30.00" "496x240x60.11" "488x576x24.96" "488x488x29.66" "488x480x30.00" "480x480x30.00" "480x478x30.00" "480x288x50.00" "480x240x60.11" "472x262x54.88" "472x243x59.21" "464x288x50.00" "464x261x55.07" "464x248x58.12" "464x240x60.11" "456x578x24.96" "456x576x24.96" "456x512x28.07" "456x480x30.00" "456x288x50.00" "456x256x56.25" "456x255x56.45" "456x252x57.07" "448x252x57.07" "448x251x57.48" "448x240x60.11" "440x257x56.05" "440x256x56.25" "440x253x56.86" "440x252x57.07" "432x512x28.07" "432x288x50.00" "432x280x51.47" "432x276x52.15" "432x264x54.50" "432x257x56.05" "432x256x56.25" "432x253x56.86" "432x252x57.07" "432x251x57.48" "432x248x58.12" "432x240x60.11" "424x512x28.07" "424x480x30.00" "424x288x50.00" "424x272x52.85" "416x288x50.00" "416x267x53.94" "416x266x54.12" "416x262x54.88" "416x256x56.25" "416x243x59.21" "416x241x59.66" "416x240x60.11" "408x266x54.12" "408x253x56.86" "408x252x57.07" "408x240x60.11" "400x512x28.07" "400x288x50.00" "400x280x51.47" "400x272x52.85" "400x264x54.50" "400x260x55.46" "400x257x56.05" "400x256x56.25" "400x253x56.86" "400x252x57.07" "400x251x57.48" "400x250x57.69" "400x248x58.12" "400x240x60.11" "392x243x59.21" "392x240x60.11" "384x576x24.96" "384x288x50.00" "384x256x56.25" "384x248x58.12" "384x240x60.11" "376x288x50.00" "376x280x51.47" "376x259x55.65" "376x240x60.11" "368x266x54.12" "368x257x56.05" "368x256x56.25" "368x240x60.11" "360x288x50.00" "360x272x52.85" "360x266x54.12" "360x251x57.27" "360x250x57.69" "360x248x58.12" "360x240x60.11" "352x288x50.00" "352x261x55.26" "352x261x55.07" "352x256x56.25" "352x248x58.12" "352x244x58.99" "352x243x59.21" "352x242x59.43" "352x240x60.11" "344x512x28.07" "344x258x55.85" "344x256x56.25" "344x241x59.66" "344x240x60.11" "344x240x59.89" "336x257x56.05" "336x252x57.07" "336x251x57.48" "336x250x57.69" "336x248x58.12" "336x244x58.99" "336x243x59.21" "336x240x60.11" "336x240x59.89" "328x244x58.99" "328x243x59.21" "328x241x59.66" "328x240x60.11" "320x256x56.25" "320x255x56.45" "320x248x58.12" "320x240x60.11" "312x288x50.00" "312x243x59.21" "312x241x59.66" "312x240x60.11" "312x240x59.89" "304x266x54.12" "304x241x59.66" "304x240x60.11" "296x288x50.00" "296x260x55.46" "296x257x56.05" "296x256x56.25" "296x255x56.45" "296x253x56.86" "296x240x60.11" "288x288x50.00" "288x266x54.12" "288x252x57.07" "288x250x57.69" "288x248x58.12" "288x240x60.11" "280x258x55.85" "280x243x59.21" "280x242x59.43" "280x241x59.66" "280x240x60.11" "280x240x59.89" "272x256x56.25" "272x252x57.07" "272x251x57.48" "272x248x58.12" "272x241x59.66" "272x240x60.11" "264x261x55.07" "264x248x58.12" "264x243x59.21" "264x241x59.66" "264x240x60.11"
EndSubSection
EndSection
--- End code ---
Would be correct?
I have seen that there is a folder called modes where might modelines (modes_mame.txt modes.txt) in 2 different formats, this folder is used for something? I mean, the used the genre to make the xorg.conf or you have to use those modelines in the xorg.conf manually?
Greetings.
--- End quote ---
lrmc.conf can be generated with lrmc -default, it output's the file and you place it in /etc/lrmc.conf adding that Clock line to it.
xorg.conf right now isn't using modelines, so I don't put them into it because they are just wasting space and it ignores them. Hopefully I can fix it so it reads them and we can do it that way eventually, but for now it uses lrmc to calculate the modelines using those labels in the Modes sections (same as input would be to lrmc).
bitbytebit:
--- Quote from: bitbytebit on October 11, 2010, 07:16:34 am ---
--- Quote from: ves on October 11, 2010, 07:12:50 am ---Hi, I have everything compiled but I can not even try, I have several questions, where is the lrm.conf? I have not found on any site, when you say to try the "Clock = 3.75 - 25 / 15625-16650 / 49.50 - 65.00" This is put in the xorg.conf, right?
I would have to change
--- Code: ---HorizSync 15.625 - 16.650
VertRefresh 49.00 - 65.00
--------------------------------------------
Option "ForceMinDotClock" "3.75MHz"
--- End code ---
When creating the xorg.conf me to believe so, I have given the following options "genres -cga -ff"
--- Code: ---Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
#Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
Option "BlankTime" "0"
Option "StandbyTime" "0"
Option "SuspendTime" "0"
Option "OffTime" "0"
Option "NoPM" "True"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/OTF"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
EndSection
Section "Module"
#Load "FGL.renamed.libglx"
Load "glx"
Load "extmod"
Load "dbe"
Load "dri2"
Load "dri"
Load "record"
SubSection "extmod"
Option "omit DPMS"
EndSubSection
EndSection
Section "ServerFlags"
Option "AIGLX" "on"
AllowMouseOpenFail
Option "Dont Zoom"
Option "NoDDC"
Option "UseEdidFreqs" "0"
Option "IgnoreEDID" "1"
Option "TMDS" "0"
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Wells Gardner"
ModelName "D9800"
HorizSync 15.250 - 16.75, 24.00 - 26.00, 31.00 - 32.00, 37-40
VertRefresh 47.00 - 85.00
Option "DPMS" "false"
EndSection
Section "Device"
Option "ForceMinDotClock" "5MHz"
Option "ModeDebug" "true"
Option "NoDDC"
Option "IgnoreEDID" "on"
#
Option "ArcadeMonitor" "d9800"
#
Identifier "Card0"
Driver "radeon"
VendorName "ATI Technologies Inc"
BoardName "Unknown Board"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "800x576x24.96" "792x480x30.00" "768x256x56.25" "768x240x60.11" "760x576x25.04" "744x486x29.66" "744x288x50.00" "744x240x60.11" "736x264x54.50" "720x480x30.00" "720x240x60.11" "712x512x28.07" "712x288x50.00" "704x480x30.00" "704x240x60.11" "696x488x29.66" "696x480x30.00" "688x512x28.07" "688x500x28.79" "672x524x27.49" "672x506x28.58" "672x480x30.00" "672x240x60.11" "656x240x60.11" "648x504x28.58" "648x502x28.69" "648x498x28.79" "648x240x60.11" "640x482x30.00" "640x480x30.00" "640x478x30.00" "640x288x50.00" "640x256x56.25" "640x240x60.11" "632x496x29.01" "632x478x30.00" "624x524x27.58" "624x486x29.66" "624x480x30.00" "624x478x30.00" "616x558x25.78" "616x480x30.00" "616x288x50.00" "608x480x30.00" "600x288x50.00" "600x240x60.11" "592x532x27.02" "592x480x30.00" "584x520x27.58" "576x578x25.04" "576x518x27.78" "576x504x28.58" "576x288x50.00" "568x480x30.00" "568x478x30.00" "560x504x28.58" "560x502x28.79" "560x500x28.90" "560x498x28.79" "560x484x29.77" "560x280x51.47" "560x243x59.21" "552x496x29.01" "552x480x30.00" "552x240x60.11" "544x486x29.55" "544x480x30.00" "544x240x60.11" "536x514x28.07" "536x482x29.89" "536x478x30.00" "536x240x60.11" "528x488x29.55" "528x480x30.00" "528x478x30.00" "528x288x50.00" "528x261x55.07" "528x245x58.77" "528x244x58.99" "528x240x60.11" "520x504x28.69" "520x240x60.11" "512x576x24.96" "512x512x28.07" "512x504x28.58" "512x480x30.00" "512x288x50.00" "512x256x56.25" "512x254x56.65" "512x252x57.07" "512x240x60.11" "504x488x29.55" "504x486x29.66" "504x484x29.66" "504x482x30.00" "504x482x29.89" "504x288x50.00" "504x250x57.69" "496x480x30.00" "496x478x30.00" "496x240x60.11" "488x576x24.96" "488x488x29.66" "488x480x30.00" "480x480x30.00" "480x478x30.00" "480x288x50.00" "480x240x60.11" "472x262x54.88" "472x243x59.21" "464x288x50.00" "464x261x55.07" "464x248x58.12" "464x240x60.11" "456x578x24.96" "456x576x24.96" "456x512x28.07" "456x480x30.00" "456x288x50.00" "456x256x56.25" "456x255x56.45" "456x252x57.07" "448x252x57.07" "448x251x57.48" "448x240x60.11" "440x257x56.05" "440x256x56.25" "440x253x56.86" "440x252x57.07" "432x512x28.07" "432x288x50.00" "432x280x51.47" "432x276x52.15" "432x264x54.50" "432x257x56.05" "432x256x56.25" "432x253x56.86" "432x252x57.07" "432x251x57.48" "432x248x58.12" "432x240x60.11" "424x512x28.07" "424x480x30.00" "424x288x50.00" "424x272x52.85" "416x288x50.00" "416x267x53.94" "416x266x54.12" "416x262x54.88" "416x256x56.25" "416x243x59.21" "416x241x59.66" "416x240x60.11" "408x266x54.12" "408x253x56.86" "408x252x57.07" "408x240x60.11" "400x512x28.07" "400x288x50.00" "400x280x51.47" "400x272x52.85" "400x264x54.50" "400x260x55.46" "400x257x56.05" "400x256x56.25" "400x253x56.86" "400x252x57.07" "400x251x57.48" "400x250x57.69" "400x248x58.12" "400x240x60.11" "392x243x59.21" "392x240x60.11" "384x576x24.96" "384x288x50.00" "384x256x56.25" "384x248x58.12" "384x240x60.11" "376x288x50.00" "376x280x51.47" "376x259x55.65" "376x240x60.11" "368x266x54.12" "368x257x56.05" "368x256x56.25" "368x240x60.11" "360x288x50.00" "360x272x52.85" "360x266x54.12" "360x251x57.27" "360x250x57.69" "360x248x58.12" "360x240x60.11" "352x288x50.00" "352x261x55.26" "352x261x55.07" "352x256x56.25" "352x248x58.12" "352x244x58.99" "352x243x59.21" "352x242x59.43" "352x240x60.11" "344x512x28.07" "344x258x55.85" "344x256x56.25" "344x241x59.66" "344x240x60.11" "344x240x59.89" "336x257x56.05" "336x252x57.07" "336x251x57.48" "336x250x57.69" "336x248x58.12" "336x244x58.99" "336x243x59.21" "336x240x60.11" "336x240x59.89" "328x244x58.99" "328x243x59.21" "328x241x59.66" "328x240x60.11" "320x256x56.25" "320x255x56.45" "320x248x58.12" "320x240x60.11" "312x288x50.00" "312x243x59.21" "312x241x59.66" "312x240x60.11" "312x240x59.89" "304x266x54.12" "304x241x59.66" "304x240x60.11" "296x288x50.00" "296x260x55.46" "296x257x56.05" "296x256x56.25" "296x255x56.45" "296x253x56.86" "296x240x60.11" "288x288x50.00" "288x266x54.12" "288x252x57.07" "288x250x57.69" "288x248x58.12" "288x240x60.11" "280x258x55.85" "280x243x59.21" "280x242x59.43" "280x241x59.66" "280x240x60.11" "280x240x59.89" "272x256x56.25" "272x252x57.07" "272x251x57.48" "272x248x58.12" "272x241x59.66" "272x240x60.11" "264x261x55.07" "264x248x58.12" "264x243x59.21" "264x241x59.66" "264x240x60.11"
EndSubSection
EndSection
--- End code ---
Would be correct?
I have seen that there is a folder called modes where might modelines (modes_mame.txt modes.txt) in 2 different formats, this folder is used for something? I mean, the used the genre to make the xorg.conf or you have to use those modelines in the xorg.conf manually?
Greetings.
--- End quote ---
lrmc.conf can be generated with lrmc -default, it output's the file and you place it in /etc/lrmc.conf adding that Clock line to it.
xorg.conf right now isn't using modelines, so I don't put them into it because they are just wasting space and it ignores them. Hopefully I can fix it so it reads them and we can do it that way eventually, but for now it uses lrmc to calculate the modelines using those labels in the Modes sections (same as input would be to lrmc).
--- End quote ---
--- Code: ---diff --git a/xf86-video-ArcadeVGA-6.13.0/src/radeon_driver.c b/xf86-video-ArcadeVGA-6.13.0/src/radeon_driver.c
index 0c1ca7b..a1f2c3b 100644
--- a/xf86-video-ArcadeVGA-6.13.0/src/radeon_driver.c
+++ b/xf86-video-ArcadeVGA-6.13.0/src/radeon_driver.c
@@ -1269,7 +1269,10 @@ static void RADEONGetClockInfo(ScrnInfoPtr pScrn)
* clocks. Allow users to override the detected minimum dot clock
* value (e.g., and allow it to be suitable for TV sets).
*/
- if (xf86GetOptValFreq(info->Options, OPTION_MIN_DOTCLOCK,
+ if (info->ArcadeMonitor != RADEON_ARCADE_NONE) {
+ /* Using an arcade monitor */
+ pll->pll_out_min = 1 * 1000;
+ } else if (xf86GetOptValFreq(info->Options, OPTION_MIN_DOTCLOCK,
OPTUNITS_MHZ, &min_dotclock)) {
if (min_dotclock < 5 || min_dotclock*100 >= pll->pll_out_max) {
xf86DrvMsg(pScrn->scrnIndex, X_INFO,
--- End code ---
This patch allows that setting of force minimum dotclock to not be necessary, and also work no matter what you put in that option. Currently without this patch when you go below 5 Mhz it ignores the value completely.
Calamity:
Hopefully with this new patches things will be even more straightforward, having to calculate modelines just once, placing them again in xorg.conf (as everyone is doing without realizing it's useless), and keeping monitor related stuff in lrmc.conf.
So, maybe we should wait until these new things are done before building it yet.
ves:
Hi, I have 2 problems to compile the ati driver, I step log.
--- Code: ---make all-recursive
make[1]: se ingresa al directorio `/home/retro/xf86-video-ArcadeVGA-6.13.0b'
Making all in src
make[2]: se ingresa al directorio `/home/retro/xf86-video-ArcadeVGA-6.13.0b/src'
/bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -I./AtomBios/includes -Wall -I/usr/include/xorg -I/usr/include/pixman-1 -I/usr/include/drm -I/usr/include/xorg -I/usr/include/pixman-1 -I/usr/include/drm -I/usr/include/X11/dri -DDISABLE_EASF -DENABLE_ALL_SERVICE_FUNCTIONS -DATOM_BIOS -DATOM_BIOS_PARSER -DDRIVER_PARSER -g -O2 -MT lrmc.lo -MD -MP -MF .deps/lrmc.Tpo -c -o lrmc.lo lrmc.c
libtool: compile: gcc -DHAVE_CONFIG_H -I. -I.. -I./AtomBios/includes -Wall -I/usr/include/xorg -I/usr/include/pixman-1 -I/usr/include/drm -I/usr/include/xorg -I/usr/include/pixman-1 -I/usr/include/drm -I/usr/include/X11/dri -DDISABLE_EASF -DENABLE_ALL_SERVICE_FUNCTIONS -DATOM_BIOS -DATOM_BIOS_PARSER -DDRIVER_PARSER -g -O2 -MT lrmc.lo -MD -MP -MF .deps/lrmc.Tpo -c lrmc.c -fPIC -DPIC -o .libs/lrmc.o
In file included from lrmc.c:25:
radeon.h:76:23: error: GL/glxint.h: No existe el fichero ó directorio
In file included from lrmc.c:25:
radeon.h:579: error: expected specifier-qualifier-list before â__GLXvisualConfigâ
lrmc.c: In function âlrmcâ:
lrmc.c:3932: warning: unused variable âinfoâ
make[2]: *** [lrmc.lo] Error 1
make[2]: se sale del directorio `/home/retro/xf86-video-ArcadeVGA-6.13.0b/src'
make[1]: *** [all-recursive] Error 1
make[1]: se sale del directorio `/home/retro/xf86-video-ArcadeVGA-6.13.0b'
make: *** [all] Error 2
--- End code ---
By the way as it applies the last diff, with patch -p0 -E <diff.diff fails.
Greetings.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version