Main > Main Forum

Need help with pc mounting

<< < (2/2)

JustMichael:
I have never seen a case riveted shut.  The rivet in your first picture looks like it is there to hold the power supply in place.  Right above that rivet looks like a normal screw hole to hold on the case's shell.  It looks like you have already removed this shell because we can see the bottom of the motherboard tray in your third picture.  This tray is NOT made to come out of the case.  It is part of the case.  You mount the motherboard to the opposite side of this tray (the inside part).  If you wish to remove the motherboard, you would remove the screws holding it in place.

EwJ:
-1 for my reading comprehension.
I had thought you meant to remove the motherboard tray from the case to mount in a cabinet or something.  It seemed that way from your pictures as you have beaten the holy hell out of the case.

As JustMichael posted, some pc cases have motherboard trays that are fixed in position.
What makes this even more confusing is that in the 2nd picture it looks as though you have a motherboard installed.

Please elaborate on your goal here.

yweiss:
i wanted to mount to mother bored like he is in the cabinet,anyway eventually  I removed the mother bored and mounted it on a wood, but now i have problem i turn the pc on but i dont see anything, its writtien on the screen "analog power save" i think that there is a problem with the video card, i have a AGP slot and the card is in this slot, what can be the problem?

tommyinajar:
Re-seat the memory, video card, Ide/sata cables and the p/s wires. Sounds like it's not posting.

Navigation

[0] Message Index

[*] Previous page

Go to full version