Main > Main Forum

Jamma Harness

(1/2) > >>

Darren01274:
Can you cut off the wires you dont need! too many wires like a bt phone box lol

Franco B:
You could chop them off if you really wanted to.

What happens if you do chop them off and you decide to play or test a PCB that uses more buttons etc?

I just cable tie them in a ring to keep them out the way but still available if required.



CheffoJeffo:

--- Quote from: Franco B on July 07, 2010, 01:33:26 pm ---You could chop them off if you really wanted to.

What happens if you do chop them off and you decide to play or test a PCB that uses more buttons etc?

I just cable tie them in a ring to keep them out the way but still available if required.

--- End quote ---

+1

There is nothing worse than going to add a button and finding that somebody snipped the harness.  :angry:

Ken Layton:
Yes, coil up the extra wires in a loop and secure wire wire ties.


Don't chop them off!

Darren01274:
Sussed it now just followed 60 in 1 manual instead of the pinout from the place where i bought it all up and running

Navigation

[0] Message Index

[#] Next page

Go to full version