Main > Main Forum

Led-Wiz will not work with windows 7 please help

<< < (3/4) > >>

tutone:
Maybe reset bios to defaults.  Check to see if there is an option for Legacy USB in the bios.
Try different USB port.  Make sure you are not using USB extension cable.
Verify USB port works with something else.

HaRuMaN:
You did make sure you have the LATEST bios update from Gigabyte?

divemaster127:
I will double check that...

Ok, problem 1 solved...I did a system restore to before I plugbed in the cp's usbs all at once. Mouse, spinner, encoder, keywiz & plugged all at once. Then I redid it 1 at at a time, keywiz first & it did the setup no problem.

2. New problem 2...Jack from arcaderus sent me mala all ready to go with the blinky already in place...no lights still & I had the error in the blinky notepad so more help would be appreciated

error is  "fe_start event can only be fired one time"

thanks a bunch again for the help
dm

HaRuMaN:
Sounds like you have an issue in your MALA setup...

You can try asking loadman for help in the MALA forum

Or you can ask arzoo for help with ledblinky.

arzoo:
Could be a Mala problem or something with the LEDBlinky configuration. The version of blinky that Jack has licensed is old - so you should probably download the latest version. If you turn on the debug and verbose options and email me the debug.zip file I'll take a look.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version