Arcade Collecting > Pinball

Roy Clark Pin - Repair Sites?

(1/1)

SirPeale:
Client has contacted me regarding his Allied Leisure pin Roy Clark the Entertainer.  Having never worked on one I wanted to arm myself with info.

The info online is amazingly SPARSE.  Nothing @ Marvin's site.  Did find this @ Flippers: http://www.flippers.com/ALI-Pinball_service.html which is a nice start.  Any other little treasure troves I'm not aware of?

lilshawn:
unless it seems like an obvious fix, i wouldn't attempt it on site.

chances are there will be less than or equal to ZERO support out there.
http://www.ipdb.org/search.pl?any=Allied+Leisure+Industries&search=Search+Database&searchtype=quick#1252


PS: the "Hoe down" and "Roy Clark" are identical 'cept for the backglass with Roy Clark on it

SirPeale:

--- Quote from: lilshawn on March 13, 2010, 04:50:37 pm ---unless it seems like an obvious fix, i wouldn't attempt it on site.

--- End quote ---

That's what I was thinking.  It seems that most of the issues with these (from the site referenced above) are power supply issues.  There isn't any high voltage, so that's a plus. 

Ken Layton:
Updating this old thread.

Repair info is posted here:

http://www.pinwiki.com/wiki/index.php?title=ALI/Fascination_Repair

Navigation

[0] Message Index