Main Restorations Software Audio/Jukebox/MP3 Everything Else Buy/Sell/Trade
Project Announcements Monitor/Video GroovyMAME Merit/JVL Touchscreen Meet Up Retail Vendors
Driving & Racing Woodworking Software Support Forums Consoles Project Arcade Reviews
Automated Projects Artwork Frontend Support Forums Pinball Forum Discussion Old Boards
Raspberry Pi & Dev Board controls.dat Linux Miscellaneous Arcade Wiki Discussion Old Archives
Lightguns Arcade1Up Try the site in https mode Site News

Unread posts | New Replies | Recent posts | Rules | Chatroom | Wiki | File Repository | RSS | Submit news

  

Author Topic: WG K71xx Monitor Issue - No Image, Jpac and Arcade VGA Used  (Read 1527 times)

0 Members and 1 Guest are viewing this topic.

helpmebuild

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 128
  • Last login:November 28, 2010, 06:32:26 pm
WG K71xx Monitor Issue - No Image, Jpac and Arcade VGA Used
« on: March 04, 2010, 11:31:45 pm »
So I am now on my second monitor in this long and seemingly infinite process of getting my cab to work. I just bought this WG K71xx from someone used, but was assured it worked great when they had it and that it was recapped as of last year. Since installing it into my cab and hooking it up, I haven't been able to get a real image yet. I get a constant haze of horizontal lines and blur. I am running a Jpac to an Arcade VGA (PCI-e) and have everything hooked up fine as to my knowledge. Does anyone have any idea as to why I am without a picture and why, once Windows fully loads, my PC/Arcade VGA Card will reboot themselves and I get no lights on my Jpac for "Sync ok" and "Sync in"?

Is this a monitor issue? A Jpac issue? An Arcade VGA issue? I just need to know what to tackle next because It seems like the problems never end.

I'm dying for some help here! Please, anyone!?


helpmebuild

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 128
  • Last login:November 28, 2010, 06:32:26 pm
Re: WG K71xx Monitor Issue - No Image, Jpac and Arcade VGA Used
« Reply #1 on: March 05, 2010, 09:16:33 am »
I hate to bump but.... no one? I'm stuck here! Anyone with any idea pls help!

MonMotha

  • Trade Count: (+2)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 2378
  • Last login:February 19, 2018, 05:45:54 pm
Re: WG K71xx Monitor Issue - No Image, Jpac and Arcade VGA Used
« Reply #2 on: March 05, 2010, 09:44:38 am »
It sounds like you have a software/driver issue, video card issue, or a bum JPAC.

helpmebuild

  • Trade Count: (+1)
  • Full Member
  • ***
  • Offline Offline
  • Posts: 128
  • Last login:November 28, 2010, 06:32:26 pm
Re: WG K71xx Monitor Issue - No Image, Jpac and Arcade VGA Used
« Reply #3 on: March 05, 2010, 10:00:56 am »
OK so it looks like a bum Arcade VGA card. I tried to connect a DVI monitor to the Arcade VGA card to test to see if I got a picture and I got absolutely nothing. So now I'm a little lost. Is it possible to use Soft 15 and onboard video? Or am I looking at having to get another video card? If so, what video card works best with the Jpac other than Arcade VGA?