Main > Main Forum
Ultimarc U-HID won't be seen as mouse by PC
(1/1)
AE35:
Hey all!
This is driving me nuts ;D
I have a U-HID that I need to use as a mouse on the PC(optical wheel, x-axis).
I've set 4 U-HID pins to do this, with two being quadrature, one being +5V and one being gnd.
But it doesn't work. If I instead connect my Ultimarc optipac next to it, the wheel works right away!
I wuld hate having two interfaces in the cabinet when I should only need the U-HID
Any advice?
Thanks!
Nicholas
AE35:
Anyone? :)
AndyWarne:
probably best to drop me an email about this: andy@ultimarc.com
AE35:
Ok, thanks!!!
Nicholas
Paul Olson:
If the wheel you are using is active low, it will not work with the uhid. I have a few from a Badlands machine that fall into this category. I was hoping to use one encoder in my cab as well, but unless I replace the optic boards in my steering wheels, it won't happen with the uhid.
Navigation
[0] Message Index
Go to full version