Author Topic: FS: Cabinets in Northern KY, Baby pacman, pole position 2 (Read 2767 times)

rob1234 · « **on:** July 07, 2007, 04:42:11 pm »

I have some cabs in Northern Kentucky for sale (Florence 41042). They are as follows:

1) Baby Pacman - this would make a great restoration project or mame cab. Would be great to have both a vertical and horizontal monitor mounted in it. The cab is missing the boards, monitor, bezel, and pinball field. $50

2) Pole position 2 without the boards. Has monitor and everything else. ~~$75~~ $50 would make a great driving mame cab.

~~3) SCI - this is a driving game that is complete. It is currently not working due to a short somewhere in the wiring ( I keep getting shocked when I touch the coin door.) $100~~

. PM me with any questions.

JackTucky · « **Reply #1 on:** July 08, 2007, 11:18:38 am »

I might be interested in the turtles cab...

=J

rob1234 · « **Reply #2 on:** July 09, 2007, 10:37:15 pm »

ratabase1 · « **Reply #3 on:** July 10, 2007, 07:58:08 pm »

Here are some Pics of Robs Turtles cabinet for sale.

Lilwolf · « **Reply #4 on:** July 11, 2007, 08:19:07 am »

Your selling my sit down driving cab? I still regret getting rid of it

I might be interested in the TMNT cab. Could you post the exact screen size (width / height).

Also, does the control panel come off of the box? or does the box come completely off?

Also, post some updated pictures of the driving cab. I would love to see how it came out after getting everything mounted.

ratabase1 · « **Reply #5 on:** July 11, 2007, 08:03:36 pm »

Here are some pics of the Baby Pacman cabinet

ratabase1 · « **Reply #6 on:** July 11, 2007, 08:04:45 pm »

Some more pics of the Baby Pacman cabinet.

ratabase1 · « **Reply #7 on:** July 11, 2007, 08:06:39 pm »

Two last pics of the baby pacman cabinet.

ratabase1 · « **Reply #8 on:** July 11, 2007, 08:07:48 pm »

Here are two pics of the Pole Position Cabinet

rob1234 · « **Reply #9 on:** July 12, 2007, 12:02:04 am »

ratabase1 · « **Reply #10 on:** July 12, 2007, 04:57:29 pm »

Here are the pics of the Special Criminal Investigation

rob1234 · « **Reply #11 on:** July 24, 2007, 10:37:23 pm »

testicle187 · « **Reply #12 on:** July 25, 2007, 12:24:06 am »

Where at in KY are you located? I'm in Bowling Green and am interested in your Pole Position cab.

rob1234 · « **Reply #13 on:** July 25, 2007, 06:40:22 am »

I am located in Florence (41042), about 15 minutes away from Cincinnati.

HighNoon · « **Reply #14 on:** July 25, 2007, 09:49:43 am »

Did u get the PM I sent you?

rob1234 · « **Reply #15 on:** July 25, 2007, 04:43:21 pm »

I replied to it when you first sent it, but I sent you another pm just now. Thanks. Rob

Quote from: HighNoon on July 25, 2007, 09:49:43 am

Did u get the PM I sent you?

rob1234 · « **Reply #16 on:** August 22, 2007, 11:38:04 pm »

Still have the pole position 2 (Have 2 of them) $50 each, $75 if you take both, and the baby pac for $50.

jfunk · « **Reply #17 on:** August 23, 2007, 09:02:52 am »

That's funny.. I just drove through Florence the other day on the way to my sis-in-law's... What's with your water tower..?

I don't think any of those cabs would've fit in the back of my CR-V... But I would've loved a pole position to mame...

Good luck with the sales.

2PacMan · « **Reply #18 on:** August 23, 2007, 09:35:19 am »

That baby pac would be a great cabinet for a Pinmame project. I wish you were closer. Can't beat that price 50.00.

Lilwolf · « **Reply #19 on:** August 23, 2007, 04:11:21 pm »

you know what... that would almost be perfect for building a multi touch system! You could set your plexi on the bottom... and then a real monitor/lcd/crt on the back... and have the coolness factor (ok, geekness factor) of being in a baby pac cab!

rob1234 · « **Reply #20 on:** August 31, 2007, 11:18:37 pm »

Come on someone out there needs these.

rob1234 · « **Reply #21 on:** September 07, 2007, 10:23:10 pm »

Still have the cabs, willing to sell parts if anyone needs them...

rob1234 · « **Reply #22 on:** October 12, 2007, 11:55:55 pm »

bump- Will trade both pole positions and the baby pacman for a working 25" monitor


Main	Restorations	Software	Audio/Jukebox/MP3	Everything Else	Buy/Sell/Trade
Project Announcements	Monitor/Video	GroovyMAME	Merit/JVL Touchscreen	Meet Up	Retail Vendors
Driving & Racing	Woodworking	Software Support Forums	Consoles	Project Arcade	Reviews
Automated Projects	Artwork	Frontend Support Forums	Pinball	Forum Discussion	Old Boards
Raspberry Pi & Dev Board	controls.dat	Linux	Miscellaneous Arcade	Wiki Discussion	Old Archives
Lightguns	Arcade1Up	Try the site in https mode		Site News


Unread posts \| New Replies \| Recent posts \| Rules \| Chatroom \| Wiki \| File Repository \| RSS \| Submit news